225 related articles for article (PubMed ID: 29520670)
1. 3D powder printed tetracalcium phosphate scaffold with phytic acid binder: fabrication, microstructure and in situ X-Ray tomography analysis of compressive failure.
Mandal S; Meininger S; Gbureck U; Basu B
J Mater Sci Mater Med; 2018 Mar; 29(3):29. PubMed ID: 29520670
[TBL] [Abstract][Full Text] [Related]
2. Strength reliability and in vitro degradation of three-dimensional powder printed strontium-substituted magnesium phosphate scaffolds.
Meininger S; Mandal S; Kumar A; Groll J; Basu B; Gbureck U
Acta Biomater; 2016 Feb; 31():401-411. PubMed ID: 26621692
[TBL] [Abstract][Full Text] [Related]
3. Different post-processing conditions for 3D bioprinted α-tricalcium phosphate scaffolds.
Bertol LS; Schabbach R; Loureiro Dos Santos LA
J Mater Sci Mater Med; 2017 Sep; 28(10):168. PubMed ID: 28916883
[TBL] [Abstract][Full Text] [Related]
4. Microstructure and compression properties of 3D powder printed Ti-6Al-4V scaffolds with designed porosity: Experimental and computational analysis.
Barui S; Chatterjee S; Mandal S; Kumar A; Basu B
Mater Sci Eng C Mater Biol Appl; 2017 Jan; 70(Pt 1):812-823. PubMed ID: 27770959
[TBL] [Abstract][Full Text] [Related]
5. Development of a new calcium phosphate powder-binder system for the 3D printing of patient specific implants.
Khalyfa A; Vogt S; Weisser J; Grimm G; Rechtenbach A; Meyer W; Schnabelrauch M
J Mater Sci Mater Med; 2007 May; 18(5):909-16. PubMed ID: 17216579
[TBL] [Abstract][Full Text] [Related]
6. Direct 3D powder printing of biphasic calcium phosphate scaffolds for substitution of complex bone defects.
Castilho M; Moseke C; Ewald A; Gbureck U; Groll J; Pires I; Teßmar J; Vorndran E
Biofabrication; 2014 Mar; 6(1):015006. PubMed ID: 24429776
[TBL] [Abstract][Full Text] [Related]
7. Fracture behaviors of ceramic tissue scaffolds for load bearing applications.
Entezari A; Roohani-Esfahani SI; Zhang Z; Zreiqat H; Dunstan CR; Li Q
Sci Rep; 2016 Jul; 6():28816. PubMed ID: 27403936
[TBL] [Abstract][Full Text] [Related]
8. Printability of calcium phosphate: calcium sulfate powders for the application of tissue engineered bone scaffolds using the 3D printing technique.
Zhou Z; Buchanan F; Mitchell C; Dunne N
Mater Sci Eng C Mater Biol Appl; 2014 May; 38():1-10. PubMed ID: 24656346
[TBL] [Abstract][Full Text] [Related]
9. Three-dimensional printing akermanite porous scaffolds for load-bearing bone defect repair: An investigation of osteogenic capability and mechanical evolution.
Liu A; Sun M; Yang X; Ma C; Liu Y; Yang X; Yan S; Gou Z
J Biomater Appl; 2016 Nov; 31(5):650-660. PubMed ID: 27585972
[TBL] [Abstract][Full Text] [Related]
10. 3D printing of porous hydroxyapatite scaffolds intended for use in bone tissue engineering applications.
Cox SC; Thornby JA; Gibbons GJ; Williams MA; Mallick KK
Mater Sci Eng C Mater Biol Appl; 2015 Feb; 47():237-47. PubMed ID: 25492194
[TBL] [Abstract][Full Text] [Related]
11. Fabrication and characterization of toughness-enhanced scaffolds comprising β-TCP/POC using the freeform fabrication system with micro-droplet jetting.
Gao L; Li C; Chen F; Liu C
Biomed Mater; 2015 Jun; 10(3):035009. PubMed ID: 26107985
[TBL] [Abstract][Full Text] [Related]
12. Three-Dimensional Extrusion Printing of Porous Scaffolds Using Storable Ceramic Inks.
Diaz-Gomez L; Elizondo ME; Kontoyiannis PD; Koons GL; Dacunha-Marinho B; Zhang X; Ajayan P; Jansen JA; Melchiorri AJ; Mikos AG
Tissue Eng Part C Methods; 2020 Jun; 26(6):292-305. PubMed ID: 32326874
[TBL] [Abstract][Full Text] [Related]
13. Structure, Properties, and In Vitro Behavior of Heat-Treated Calcium Sulfate Scaffolds Fabricated by 3D Printing.
Asadi-Eydivand M; Solati-Hashjin M; Shafiei SS; Mohammadi S; Hafezi M; Abu Osman NA
PLoS One; 2016; 11(3):e0151216. PubMed ID: 26999789
[TBL] [Abstract][Full Text] [Related]
14. New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes.
Butscher A; Bohner M; Doebelin N; Hofmann S; Müller R
Acta Biomater; 2013 Nov; 9(11):9149-58. PubMed ID: 23891808
[TBL] [Abstract][Full Text] [Related]
15. 3D plotting in the preparation of newberyite, struvite, and brushite porous scaffolds: using magnesium oxide as a starting material.
Cao X; Lu H; Liu J; Lu W; Guo L; Ma M; Zhang B; Guo Y
J Mater Sci Mater Med; 2019 Jul; 30(8):88. PubMed ID: 31325082
[TBL] [Abstract][Full Text] [Related]
16. Integrated additive design and manufacturing approach for the bioengineering of bone scaffolds for favorable mechanical and biological properties.
Valainis D; Dondl P; Foehr P; Burgkart R; Kalkhof S; Duda GN; van Griensven M; Poh PSP
Biomed Mater; 2019 Sep; 14(6):065002. PubMed ID: 31387088
[TBL] [Abstract][Full Text] [Related]
17. Three-dimensional (3D) printed scaffold and material selection for bone repair.
Zhang L; Yang G; Johnson BN; Jia X
Acta Biomater; 2019 Jan; 84():16-33. PubMed ID: 30481607
[TBL] [Abstract][Full Text] [Related]
18. Effect of strontium substitution on the material properties and osteogenic potential of 3D powder printed magnesium phosphate scaffolds.
Meininger S; Moseke C; Spatz K; März E; Blum C; Ewald A; Vorndran E
Mater Sci Eng C Mater Biol Appl; 2019 May; 98():1145-1158. PubMed ID: 30812998
[TBL] [Abstract][Full Text] [Related]
19. 3D fabrication and characterization of phosphoric acid scaffold with a HA/β-TCP weight ratio of 60:40 for bone tissue engineering applications.
Wang Y; Wang K; Li X; Wei Q; Chai W; Wang S; Che Y; Lu T; Zhang B
PLoS One; 2017; 12(4):e0174870. PubMed ID: 28406922
[TBL] [Abstract][Full Text] [Related]
20. Effect of layer thickness and printing orientation on mechanical properties and dimensional accuracy of 3D printed porous samples for bone tissue engineering.
Farzadi A; Solati-Hashjin M; Asadi-Eydivand M; Abu Osman NA
PLoS One; 2014; 9(9):e108252. PubMed ID: 25233468
[TBL] [Abstract][Full Text] [Related]
[Next] [New Search]