These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


BIOMARKERS

Molecular Biopsy of Human Tumors

- a resource for Precision Medicine *

183 related articles for article (PubMed ID: 31108792)

  • 21. 3D-printed applicators for high dose rate brachytherapy: Dosimetric assessment at different infill percentage.
    Ricotti R; Vavassori A; Bazani A; Ciardo D; Pansini F; Spoto R; Sammarco V; Cattani F; Baroni G; Orecchia R; Jereczek-Fossa BA
    Phys Med; 2016 Dec; 32(12):1698-1706. PubMed ID: 27592531
    [TBL] [Abstract][Full Text] [Related]  

  • 22. Sustainable 3D printing of oral films with tunable characteristics using CMC-based inks from durian rind wastes.
    Panraksa P; Rachtanapun P; Thipchai P; Lesniewska E; Brachais CH; Debeaufort F; Chambin O; Jantrawut P
    Eur J Pharm Biopharm; 2023 May; 186():30-42. PubMed ID: 36933810
    [TBL] [Abstract][Full Text] [Related]  

  • 23. Load Distribution on PET-G 3D Prints of Honeycomb Cellular Structures under Compression Load.
    Basurto-Vázquez O; Sánchez-Rodríguez EP; McShane GJ; Medina DI
    Polymers (Basel); 2021 Jun; 13(12):. PubMed ID: 34204196
    [TBL] [Abstract][Full Text] [Related]  

  • 24. Influence of fused deposition modelling printing parameters on tablet disintegration times: a design of experiments study.
    Kreft K; Stanić T; Perhavec P; Dreu R; Lavrič Z
    Acta Pharm; 2023 Sep; 73(3):405-422. PubMed ID: 37708955
    [TBL] [Abstract][Full Text] [Related]  

  • 25. Mechanical behavior of 3D-printed PEEK and its application for personalized orbital implants with various infill patterns and densities.
    Timoumi M; Barhoumi N; Znaidi A; Maazouz A; Lamnawar K
    J Mech Behav Biomed Mater; 2022 Dec; 136():105534. PubMed ID: 36327664
    [TBL] [Abstract][Full Text] [Related]  

  • 26. Impact of infill density on morphology and mechanical properties of 3D printed ABS/CF-ABS composites using design of experiments.
    Turaka S; Jagannati V; Pappula B; Makgato S
    Heliyon; 2024 May; 10(9):e29920. PubMed ID: 38707363
    [TBL] [Abstract][Full Text] [Related]  

  • 27. Towards 3D printed multifunctional immobilization for proton therapy: Initial materials characterization.
    Michiels S; D'Hollander A; Lammens N; Kersemans M; Zhang G; Denis JM; Poels K; Sterpin E; Nuyts S; Haustermans K; Depuydt T
    Med Phys; 2016 Oct; 43(10):5392. PubMed ID: 27782703
    [TBL] [Abstract][Full Text] [Related]  

  • 28. An investigation of combined effect of infill pattern, density, and layer thickness on mechanical properties of 3D printed ABS by fused filament fabrication.
    Agrawal AP; Kumar V; Kumar J; Paramasivam P; Dhanasekaran S; Prasad L
    Heliyon; 2023 Jun; 9(6):e16531. PubMed ID: 37274679
    [TBL] [Abstract][Full Text] [Related]  

  • 29. Prediction of textural properties of 3D-printed food using response surface methodology.
    Lee CP; Hashimoto M
    Heliyon; 2024 Apr; 10(7):e27658. PubMed ID: 38560226
    [TBL] [Abstract][Full Text] [Related]  

  • 30. Preparation and investigation of novel gastro-floating tablets with 3D extrusion-based printing.
    Li Q; Guan X; Cui M; Zhu Z; Chen K; Wen H; Jia D; Hou J; Xu W; Yang X; Pan W
    Int J Pharm; 2018 Jan; 535(1-2):325-332. PubMed ID: 29051121
    [TBL] [Abstract][Full Text] [Related]  

  • 31. Foaming of 3D-Printed PLA/CaCO
    Faba S; Agüero Á; Arrieta MP; Martínez S; Romero J; Torres A; Galotto MJ
    Polymers (Basel); 2024 Mar; 16(6):. PubMed ID: 38543404
    [TBL] [Abstract][Full Text] [Related]  

  • 32. Mechanical properties of 3-D printed polyvinyl alcohol matrix for detection of respiratory pathogens.
    Al-Taie A; Pan J; Polak P; Barer MR; Han X; Abbott AP
    J Mech Behav Biomed Mater; 2020 Dec; 112():104066. PubMed ID: 32942228
    [TBL] [Abstract][Full Text] [Related]  

  • 33. Topology Optimization and Prototype of a Multimaterial-Like Compliant Finger by Varying the Infill Density in 3D Printing.
    Liu CH; Chen Y; Yang SY
    Soft Robot; 2022 Oct; 9(5):837-849. PubMed ID: 34619072
    [TBL] [Abstract][Full Text] [Related]  

  • 34. Direct Pellet Three-Dimensional Printing of Polybutylene Adipate-co-Terephthalate for a Greener Future.
    Karimi A; Rahmatabadi D; Baghani M
    Polymers (Basel); 2024 Jan; 16(2):. PubMed ID: 38257066
    [TBL] [Abstract][Full Text] [Related]  

  • 35. Effects of Infill Line Multiplier and Patterns on Mechanical Properties of Lightweight and Resilient Hollow Section Products Manufactured Using Fused Filament Fabrication.
    Khaliq J; Gurrapu DR; Elfakhri F
    Polymers (Basel); 2023 Jun; 15(12):. PubMed ID: 37376230
    [TBL] [Abstract][Full Text] [Related]  

  • 36. 3D food printing: Applications of plant-based materials in extrusion-based food printing.
    Wang M; Li D; Zang Z; Sun X; Tan H; Si X; Tian J; Teng W; Wang J; Liang Q; Bao Y; Li B; Liu R
    Crit Rev Food Sci Nutr; 2022; 62(26):7184-7198. PubMed ID: 33856247
    [TBL] [Abstract][Full Text] [Related]  

  • 37. Prediction of Tensile Strength of 3D Printed Bronze PLA Part Using Response Surface Modelling.
    Palanisamy C; Nagarajan S
    F1000Res; 2021; 10():1030. PubMed ID: 35169462
    [No Abstract]   [Full Text] [Related]  

  • 38. Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen.
    Palekar S; Nukala PK; Mishra SM; Kipping T; Patel K
    Int J Pharm; 2019 Feb; 556():106-116. PubMed ID: 30513398
    [TBL] [Abstract][Full Text] [Related]  

  • 39. The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process.
    Lalegani Dezaki M; Mohd Ariffin MKA
    Polymers (Basel); 2020 Nov; 12(12):. PubMed ID: 33255897
    [TBL] [Abstract][Full Text] [Related]  

  • 40. Three-dimensional printing of gastro-floating tablets using polyethylene glycol diacrylate-based photocurable printing material.
    Lin X; Fu H; Hou Z; Si Y; Shan W; Yang Y
    Int J Pharm; 2021 Jun; 603():120674. PubMed ID: 33964341
    [TBL] [Abstract][Full Text] [Related]  

    [Previous]   [Next]    [New Search]
    of 10.