These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


BIOMARKERS

Molecular Biopsy of Human Tumors

- a resource for Precision Medicine *

278 related articles for article (PubMed ID: 32349467)

  • 1. 3D Printing of Polyethylene Terephthalate Glycol-Sepiolite Composites with Nanoscale Orientation.
    Kim H; Ryu KH; Baek D; Khan TA; Kim HJ; Shin S; Hyun J; Ahn JS; Ahn SJ; Kim HJ; Koo J
    ACS Appl Mater Interfaces; 2020 May; 12(20):23453-23463. PubMed ID: 32349467
    [TBL] [Abstract][Full Text] [Related]  

  • 2. Printability and Tensile Performance of 3D Printed Polyethylene Terephthalate Glycol Using Fused Deposition Modelling.
    Guessasma S; Belhabib S; Nouri H
    Polymers (Basel); 2019 Jul; 11(7):. PubMed ID: 31336645
    [TBL] [Abstract][Full Text] [Related]  

  • 3. Investigation of the Effectiveness of Silicon Nitride as a Reinforcement Agent for Polyethylene Terephthalate Glycol in Material Extrusion 3D Printing.
    Michailidis N; Petousis M; Saltas V; Papadakis V; Spiridaki M; Mountakis N; Argyros A; Valsamos J; Nasikas NK; Vidakis N
    Polymers (Basel); 2024 Apr; 16(8):. PubMed ID: 38674964
    [TBL] [Abstract][Full Text] [Related]  

  • 4. Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling.
    Hsueh MH; Lai CJ; Wang SH; Zeng YS; Hsieh CH; Pan CY; Huang WC
    Polymers (Basel); 2021 May; 13(11):. PubMed ID: 34072038
    [TBL] [Abstract][Full Text] [Related]  

  • 5. Mechanical and Electrical Properties of Polyethylene Terephthalate Glycol/Antimony Tin Oxide Nanocomposites in Material Extrusion 3D Printing.
    Petousis M; Michailidis N; Saltas V; Papadakis V; Spiridaki M; Mountakis N; Argyros A; Valsamos J; Nasikas NK; Vidakis N
    Nanomaterials (Basel); 2024 Apr; 14(9):. PubMed ID: 38727355
    [TBL] [Abstract][Full Text] [Related]  

  • 6. The Mechanical Properties of 3D-Printed Polylactic Acid/Polyethylene Terephthalate Glycol Multi-Material Structures Manufactured by Material Extrusion.
    Demir E; Duygun İK; Bedeloğlu A
    3D Print Addit Manuf; 2024 Feb; 11(1):197-206. PubMed ID: 38389667
    [TBL] [Abstract][Full Text] [Related]  

  • 7. Continuous Fiber-Reinforced Aramid/PETG 3D-Printed Composites with High Fiber Loading through Fused Filament Fabrication.
    Rijckaert S; Daelemans L; Cardon L; Boone M; Van Paepegem W; De Clerck K
    Polymers (Basel); 2022 Jan; 14(2):. PubMed ID: 35054704
    [TBL] [Abstract][Full Text] [Related]  

  • 8. Optimization of Printing Parameters to Maximize the Mechanical Properties of 3D-Printed PETG-Based Parts.
    Valvez S; Silva AP; Reis PNB
    Polymers (Basel); 2022 Jun; 14(13):. PubMed ID: 35808611
    [TBL] [Abstract][Full Text] [Related]  

  • 9. Enhancing Mechanical Properties of Polymer 3D Printed Parts.
    Amza CG; Zapciu A; Constantin G; Baciu F; Vasile MI
    Polymers (Basel); 2021 Feb; 13(4):. PubMed ID: 33668615
    [TBL] [Abstract][Full Text] [Related]  

  • 10. Effect of Different Standard Geometry Shapes on the Tensile Properties of 3D-Printed Polymer.
    Faidallah RF; Hanon MM; Vashist V; Habib A; Szakál Z; Oldal I
    Polymers (Basel); 2023 Jul; 15(14):. PubMed ID: 37514419
    [TBL] [Abstract][Full Text] [Related]  

  • 11. Facile Route for 3D Printing of Transparent PETg-Based Hybrid Biomicrofluidic Devices Promoting Cell Adhesion.
    Mehta V; Vilikkathala Sudhakaran S; Rath SN
    ACS Biomater Sci Eng; 2021 Aug; 7(8):3947-3963. PubMed ID: 34282888
    [TBL] [Abstract][Full Text] [Related]  

  • 12. Comparative Analysis of the Influence of Mineral Engine Oil on the Mechanical Parameters of FDM 3D-Printed PLA, PLA+CF, PETG, and PETG+CF Materials.
    Hozdić E; Hozdić E
    Materials (Basel); 2023 Sep; 16(18):. PubMed ID: 37763618
    [TBL] [Abstract][Full Text] [Related]  

  • 13. Tensile and Bending Strength Improvements in PEEK Parts Using Fused Deposition Modelling 3D Printing Considering Multi-Factor Coupling.
    Li Y; Lou Y
    Polymers (Basel); 2020 Oct; 12(11):. PubMed ID: 33121088
    [TBL] [Abstract][Full Text] [Related]  

  • 14. Evaluation of polyethylene terephthalate glycol (PETG), Simubone™, and photopolymer resin as 3D printed temporal bone models for surgical simulation.
    Cafino R; Soliven MMT; Velasco LC; Lopez KH
    Asian J Surg; 2024 Jan; 47(1):237-244. PubMed ID: 37633781
    [TBL] [Abstract][Full Text] [Related]  

  • 15. Accelerated Aging Effect on Mechanical Properties of Common 3D-Printing Polymers.
    Amza CG; Zapciu A; Baciu F; Vasile MI; Nicoara AI
    Polymers (Basel); 2021 Nov; 13(23):. PubMed ID: 34883635
    [TBL] [Abstract][Full Text] [Related]  

  • 16. 3D Printing of Fiber-Reinforced Plastic Composites Using Fused Deposition Modeling: A Status Review.
    Pervaiz S; Qureshi TA; Kashwani G; Kannan S
    Materials (Basel); 2021 Aug; 14(16):. PubMed ID: 34443044
    [TBL] [Abstract][Full Text] [Related]  

  • 17. Experimental and Numerical Analysis for the Mechanical Characterization of PETG Polymers Manufactured with FDM Technology under Pure Uniaxial Compression Stress States for Architectural Applications.
    Mercado-Colmenero JM; La Rubia MD; Mata-Garcia E; Rodriguez-Santiago M; Martin-Doñate C
    Polymers (Basel); 2020 Sep; 12(10):. PubMed ID: 32992856
    [TBL] [Abstract][Full Text] [Related]  

  • 18. Sustainable Additive Manufacturing: Mechanical Response of Polyethylene Terephthalate Glycol over Multiple Recycling Processes.
    Vidakis N; Petousis M; Tzounis L; Grammatikos SA; Porfyrakis E; Maniadi A; Mountakis N
    Materials (Basel); 2021 Mar; 14(5):. PubMed ID: 33801265
    [TBL] [Abstract][Full Text] [Related]  

  • 19. Thermomechanical Material Characterization of Polyethylene Terephthalate Glycol with 30% Carbon Fiber for Large-Format Additive Manufacturing of Polymer Structures.
    Martin KA; Riveros GA; Thornell TL; McClelland ZB; Freeman EL; Stinson JT
    Polymers (Basel); 2024 Jul; 16(13):. PubMed ID: 39000768
    [TBL] [Abstract][Full Text] [Related]  

  • 20. Improvement of Surface Roughness and Hydrophobicity in PETG Parts Manufactured via Fused Deposition Modeling (FDM): An Application in 3D Printed Self-Cleaning Parts.
    Barrios JM; Romero PE
    Materials (Basel); 2019 Aug; 12(15):. PubMed ID: 31390834
    [TBL] [Abstract][Full Text] [Related]  

    [Next]    [New Search]
    of 14.