155 related articles for article (PubMed ID: 33616559)
1. Temporary 3D printed fixed dental prosthesis materials: Impact of post printing cleaning methods on degree of conversion as well as surface and mechanical properties.
Mayer J; Reymus M; Wiedenmann F; Edelhoff D; Hickel R; Stawarczyk B
Int J Prosthodont; 2021; 34(6):784–795. PubMed ID: 33616559
[TBL] [Abstract][Full Text] [Related]
2. Fracture load of 3D-printed fixed dental prostheses compared with milled and conventionally fabricated ones: the impact of resin material, build direction, post-curing, and artificial aging-an in vitro study.
Reymus M; Fabritius R; Keßler A; Hickel R; Edelhoff D; Stawarczyk B
Clin Oral Investig; 2020 Feb; 24(2):701-710. PubMed ID: 31127429
[TBL] [Abstract][Full Text] [Related]
3. Influence of Different Postpolymerization Strategies and Artificial Aging on Hardness of 3D-Printed Resin Materials: An In Vitro Study.
Reymus M; Stawarczyk B
Int J Prosthodont; 2020; 33(6):634-640. PubMed ID: 33284905
[TBL] [Abstract][Full Text] [Related]
4. In vitro study on the influence of postpolymerization and aging on the Martens parameters of 3D-printed occlusal devices.
Reymus M; Stawarczyk B
J Prosthet Dent; 2021 May; 125(5):817-823. PubMed ID: 32444206
[TBL] [Abstract][Full Text] [Related]
5. 3D-printed material for temporary restorations: impact of print layer thickness and post-curing method on degree of conversion.
Reymus M; Lümkemann N; Stawarczyk B
Int J Comput Dent; 2019; 22(3):231-237. PubMed ID: 31463487
[TBL] [Abstract][Full Text] [Related]
6. Influence of cleaning methods after 3D printing on two-body wear and fracture load of resin-based temporary crown and bridge material.
Mayer J; Stawarczyk B; Vogt K; Hickel R; Edelhoff D; Reymus M
Clin Oral Investig; 2021 Oct; 25(10):5987-5996. PubMed ID: 33811531
[TBL] [Abstract][Full Text] [Related]
7. Impact of post printing cleaning methods on geometry, transmission, roughness parameters, and flexural strength of 3D-printed zirconia.
Liebermann A; Schultheis A; Faber F; Rammelsberg P; Rues S; Schwindling FS
Dent Mater; 2023 Jul; 39(7):625-633. PubMed ID: 37179237
[TBL] [Abstract][Full Text] [Related]
8. Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials.
Mudhaffer S; Althagafi R; Haider J; Satterthwaite J; Silikas N
Dent Mater; 2024 Jul; 40(7):1003-1014. PubMed ID: 38735775
[TBL] [Abstract][Full Text] [Related]
9. Postpolymerization of a 3D-printed denture base polymer: Impact of post-curing methods on surface characteristics, flexural strength, and cytotoxicity.
Li P; Lambart AL; Stawarczyk B; Reymus M; Spintzyk S
J Dent; 2021 Dec; 115():103856. PubMed ID: 34695506
[TBL] [Abstract][Full Text] [Related]
10. Comparison of various 3D printed and milled PAEK materials: Effect of printing direction and artificial aging on Martens parameters.
Prechtel A; Reymus M; Edelhoff D; Hickel R; Stawarczyk B
Dent Mater; 2020 Feb; 36(2):197-209. PubMed ID: 31785832
[TBL] [Abstract][Full Text] [Related]
11. Influence of postprocessing rinsing solutions and duration on flexural strength of aged and nonaged additively manufactured interim dental material.
Scherer MD; Al-Haj Husain N; Barmak AB; Kois JC; Özcan M; Revilla-León M
J Prosthet Dent; 2024 May; 131(5):959-968. PubMed ID: 35599060
[TBL] [Abstract][Full Text] [Related]
12. Rinsing postprocessing procedure of a 3D-printed orthodontic appliance material: Impact of alternative post-rinsing solutions on the roughness, flexural strength and cytotoxicity.
Lambart AL; Xepapadeas AB; Koos B; Li P; Spintzyk S
Dent Mater; 2022 Aug; 38(8):1344-1353. PubMed ID: 35752470
[TBL] [Abstract][Full Text] [Related]
13. In vitro investigation of the influence of printing direction on the flexural strength, flexural modulus and fractographic analysis of 3D-printed temporary materials.
KEßLER A; Hickel R; Ilie N
Dent Mater J; 2021 May; 40(3):641-649. PubMed ID: 33456026
[TBL] [Abstract][Full Text] [Related]
14. Time-dependent degree of conversion, Martens parameters, and flexural strength of different dual-polymerizing resin composite luting materials.
Kelch M; Stawarczyk B; Mayinger F
Clin Oral Investig; 2022 Jan; 26(1):1067-1076. PubMed ID: 34342762
[TBL] [Abstract][Full Text] [Related]
15. Chemical and mechanical properties of dual-polymerizing core build-up materials.
Kelch M; Stawarczyk B; Mayinger F
Clin Oral Investig; 2022 Jul; 26(7):4885-4896. PubMed ID: 35344103
[TBL] [Abstract][Full Text] [Related]
16. Three-body wear of 3D printed temporary materials.
Kessler A; Reymus M; Hickel R; Kunzelmann KH
Dent Mater; 2019 Dec; 35(12):1805-1812. PubMed ID: 31727446
[TBL] [Abstract][Full Text] [Related]
17. Effect of printing orientation on the fracture strength of additively manufactured 3-unit interim fixed dental prostheses after aging.
Diken Turksayar AA; Donmez MB; Olcay EO; Demirel M; Demir E
J Dent; 2022 Sep; 124():104155. PubMed ID: 35526752
[TBL] [Abstract][Full Text] [Related]
18. Comparing the mechanical properties of pressed, milled, and 3D-printed resins for occlusal devices.
Berli C; Thieringer FM; Sharma N; Müller JA; Dedem P; Fischer J; Rohr N
J Prosthet Dent; 2020 Dec; 124(6):780-786. PubMed ID: 31955837
[TBL] [Abstract][Full Text] [Related]
19. Biaxial flexural strength of different provisional restorative materials under chemo-mechanical aging: An in vitro study.
Sadek HMA; El-Banna A
J Prosthodont; 2024 Feb; 33(2):149-156. PubMed ID: 36738226
[TBL] [Abstract][Full Text] [Related]
20. Fracture toughness, work of fracture, flexural strength and elastic modulus of 3D-printed denture base resins in two measurement environments after artificial aging.
Geiger V; Mayinger F; Hoffmann M; Reymus M; Stawarczyk B
J Mech Behav Biomed Mater; 2024 Feb; 150():106234. PubMed ID: 37995602
[TBL] [Abstract][Full Text] [Related]
[Next] [New Search]
