174 related articles for article (PubMed ID: 37100933)
1. Achieving effective interlayer bonding of PLA parts during the material extrusion process with enhanced mechanical properties.
Kumar MS; Farooq MU; Ross NS; Yang CH; Kavimani V; Adediran AA
Sci Rep; 2023 Apr; 13(1):6800. PubMed ID: 37100933
[TBL] [Abstract][Full Text] [Related]
2. Taguchi optimization of 3D printed short carbon fiber polyetherketoneketone (CFR PEKK).
Rabinowitz A; DeSantis PM; Basgul C; Spece H; Kurtz SM
J Mech Behav Biomed Mater; 2023 Sep; 145():105981. PubMed ID: 37481803
[TBL] [Abstract][Full Text] [Related]
3. Design of Experiments to Compare the Mechanical Properties of Polylactic Acid Using Material Extrusion Three-Dimensional-Printing Thermal Parameters Based on a Cyber-Physical Production System.
Castillo M; Monroy R; Ahmad R
Sensors (Basel); 2023 Dec; 23(24):. PubMed ID: 38139679
[TBL] [Abstract][Full Text] [Related]
4. Experimental Study of the Tensile Behavior of Structures Obtained by FDM 3D Printing Process.
Ben Hadj Hassine S; Chatti S; Louhichi B; Seibi A
Polymers (Basel); 2024 May; 16(11):. PubMed ID: 38891508
[TBL] [Abstract][Full Text] [Related]
5. Application of Taguchi Method to Optimize the Parameter of Fused Deposition Modeling (FDM) Using Oil Palm Fiber Reinforced Thermoplastic Composites.
Ahmad MN; Ishak MR; Mohammad Taha M; Mustapha F; Leman Z; Anak Lukista DD; Irianto ; Ghazali I
Polymers (Basel); 2022 May; 14(11):. PubMed ID: 35683812
[TBL] [Abstract][Full Text] [Related]
6. Investigation of Interlayer Interface Strength and Print Morphology Effects in Fused Deposition Modeling 3D-Printed PLA.
Perez DB; Celik E; Karkkainen RL
3D Print Addit Manuf; 2021 Feb; 8(1):23-32. PubMed ID: 36655175
[TBL] [Abstract][Full Text] [Related]
7. 3D Printing Parameter Optimization Using Taguchi Approach to Examine Acrylonitrile Styrene Acrylate (ASA) Mechanical Properties.
Hameed AZ; Aravind Raj S; Kandasamy J; Shahzad MA; Baghdadi MA
Polymers (Basel); 2022 Aug; 14(16):. PubMed ID: 36015513
[TBL] [Abstract][Full Text] [Related]
8. Printing Parameter Optimization of Additive Manufactured PLA Using Taguchi Design of Experiment.
Ahmed BA; Nadeem U; Hakeem AS; Ul-Hamid A; Khan MY; Younas M; Saeed HA
Polymers (Basel); 2023 Nov; 15(22):. PubMed ID: 38006094
[TBL] [Abstract][Full Text] [Related]
9. Experimental Study of In-Process Heat Treatment on the Mechanical Properties of 3D Printed Thermoplastic Polymer PLA.
Tamașag I; Beșliu-Băncescu I; Severin TL; Dulucheanu C; Cerlincă DA
Polymers (Basel); 2023 May; 15(10):. PubMed ID: 37242942
[TBL] [Abstract][Full Text] [Related]
10. Energy Consumption vs. Tensile Strength of Poly[methyl methacrylate] in Material Extrusion 3D Printing: The Impact of Six Control Settings.
Vidakis N; Petousis M; Mountakis N; Moutsopoulou A; Karapidakis E
Polymers (Basel); 2023 Feb; 15(4):. PubMed ID: 36850131
[TBL] [Abstract][Full Text] [Related]
11. Characterization and parametric optimization of additive manufacturing process for enhancing mechanical properties.
Tura AD; Mamo HB
Heliyon; 2022 Jul; 8(7):e09832. PubMed ID: 35815121
[TBL] [Abstract][Full Text] [Related]
12. Bulk-Material Bond Strength Exists in Extrusion Additive Manufacturing for a Wide Range of Temperatures, Speeds, and Layer Times.
Moetazedian A; Allum J; Gleadall A; Silberschmidt VV
3D Print Addit Manuf; 2023 Jun; 10(3):514-523. PubMed ID: 37346192
[TBL] [Abstract][Full Text] [Related]
13. PLA-Based Composite Panels Prepared via Multi-Material Fused Filament Fabrication and Associated Investigation of Process Parameters on Flexural Properties of the Fabricated Composite.
Wang Z; Wang L; Tang F; Shen C
Polymers (Basel); 2023 Dec; 16(1):. PubMed ID: 38201774
[TBL] [Abstract][Full Text] [Related]
14. Parameters Affecting the Mechanical Properties of Three-Dimensional (3D) Printed Carbon Fiber-Reinforced Polylactide Composites.
Lee D; Wu GY
Polymers (Basel); 2020 Oct; 12(11):. PubMed ID: 33114103
[TBL] [Abstract][Full Text] [Related]
15. Interlayer bonding strength of 3D printed PEEK specimens.
Liaw CY; Tolbert JW; Chow LW; Guvendiren M
Soft Matter; 2021 May; 17(18):4775-4789. PubMed ID: 33870997
[TBL] [Abstract][Full Text] [Related]
16. Maximizing performance and efficiency in 3D printing of polylactic acid biomaterials: Unveiling of microstructural morphology, and implications of process parameters and modeling of the mechanical strength, surface roughness, print time, and print energy for fused filament fabricated (FFF) bioparts.
Mushtaq RT; Wang Y; Bao C; Rehman M; Sharma S; Khan AM; Eldin EM; Abbas M
Int J Biol Macromol; 2024 Feb; 259(Pt 2):129201. PubMed ID: 38191110
[TBL] [Abstract][Full Text] [Related]
17. Morphology and Mechanical Properties of 3D Printed Wood Fiber/Polylactic Acid Composite Parts Using Fused Deposition Modeling (FDM): The Effects of Printing Speed.
Yang TC; Yeh CH
Polymers (Basel); 2020 Jun; 12(6):. PubMed ID: 32545359
[TBL] [Abstract][Full Text] [Related]
18. Investigation and Prediction of Tensile, Flexural, and Compressive Properties of Tough PLA Material Using Definitive Screening Design.
Al-Tamimi AA; Pandžić A; Kadrić E
Polymers (Basel); 2023 Oct; 15(20):. PubMed ID: 37896413
[TBL] [Abstract][Full Text] [Related]
19. Optimization of 3D Printing Parameters of Biodegradable Polylactic Acid/Hydroxyapatite Composite Bone Plates.
Aihemaiti P; Jiang H; Aiyiti W; Kasimu A
Int J Bioprint; 2022; 8(1):490. PubMed ID: 35187281
[TBL] [Abstract][Full Text] [Related]
20. Influence of Three-Dimensional Printing Parameters on Compressive Properties and Surface Smoothness of Polylactic Acid Specimens.
Bakhtiari H; Nikzad M; Tolouei-Rad M
Polymers (Basel); 2023 Sep; 15(18):. PubMed ID: 37765681
[TBL] [Abstract][Full Text] [Related]
[Next] [New Search]
