These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effect of home bleaching products on mercury release from an admixed amalgam.
    Author: Robertello FJ, Dishman MV, Sarrett DC, Epperly AC.
    Journal: Am J Dent; 1999 Oct; 12(5):227-30. PubMed ID: 10649913.
    Abstract:
    PURPOSE: To test the effect of three carbamide peroxide bleaching products, Opalescence (O), Nite White (N), and Platinum (P) on mercury release from amalgam (Valiant PhD). MATERIALS AND METHODS: Sixty uniform amalgam specimens were prepared in Acrylite clear acrylic blocks. After aging for 1 week at 37 degrees C, the specimens were placed in individual polystyrene jars containing 20 mL of sterile saline, and divided into three groups A, B, and C. Specimens were bleached in cycles by removing them from the jars, blotting to remove excess moisture, and covering with either O, N, P, or saline control (SC). After 8 hours, the specimens were cleaned with a toothbrush, rinsed with deionized water, and returned to the saline. Group A was tested for mercury release after 8 hours of bleaching, Group B after 40 total hours of bleaching, and Group C after 80 total hours of bleaching. Mercury testing was performed by first reducing the mercury in solution in each jar with 1 mL of SnCl2, and then testing the remaining headspace with a Gold Film Mercury Vapor Analyzer. RESULTS: ANOVA indicated there was no significant difference between the bleaches and controls at 8 and 40 hours, however at 80 hours, O caused significantly more mercury release (P < 0.05). Means at 80 hours in mg/m3 were: O = 0.98 +/- 0.36; N = 0.58 +/- 0.20; P = 0.47 +/- 0.11; SC = 0.52 +/- 0.14.
    [Abstract] [Full Text] [Related] [New Search]