These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Containment testing of laboratory hoods in the as-used condition.
    Author: Greenley PL, Billings CE, DiBerardinis LJ, Edwards RW, Barkley WE.
    Journal: Appl Occup Environ Hyg; 2000 Feb; 15(2):209-16. PubMed ID: 10675979.
    Abstract:
    Airborne contaminants generated inside laboratory fume hoods during use leak into the breathing zone of the user. Concentration of the leakage is unknown and variable depending on laboratory design, work practices, arrangement of internal apparatus, face velocity, and sash height. Surrogate tracer gas tests have been developed using sulfur hexafluoride (SF6) and a manikin to estimate leakage. This study presents results of hood leakage tests using SF6 with a manikin and then a live operator performing a phenol:chloroform (P:C) extraction. Four hoods were tested in each of three institutions during normal work hours with the lab occupied. The purpose of the study was to determine leakage concentrations for the SF6-manikin with effects of sash height, hood contents as found and after being cleaned out, face velocity, and the actual P:C and SF6 exposure concentrations of the user during work. Results indicate P:C was not detectable in the breathing zone of the 12 operators (< 0.1 ppm) at their selected operating sash heights (7 to 15 inches). Simultaneous SF6 concentrations were also minimal (average 0.06 ppm). Average leakage was 0.02 percent for SF6 and less than 2 percent based on chloroform concentrations measured in the breathing zone of the operator and inside the hood. SF6 percent leakage was greater when sash height was above the breathing zone of the manikin (average 2.09 percent) and lower leakage (average 0.02 percent) when below the breathing zone (26 inches or less). Average face velocity did not appear to be a predictor of average hood leakage. Cleaning out the hoods did not reduce leakage in most tests. The data from this study shows that when providing training on proper work practices for lab hood use, lowering the sash should be stressed as being the major factor in reducing hood leakage.
    [Abstract] [Full Text] [Related] [New Search]