These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Fluoride release of polyacid-modified composite resins with and without bonding agents.
    Author: Vercruysse CW, De Maeyer EA, Verbeeck RM.
    Journal: Dent Mater; 2001 Jul; 17(4):354-8. PubMed ID: 11356213.
    Abstract:
    OBJECTIVES: The aim of this study was to investigate the influence of the proprietary bonding agents Hytac OSB (OSB) (Espe), Prime&Bond 2.1 (PB) (Dentsply DeTrey) and Syntac Single Component (SSC) (Vivadent) on the fluoride release of the corresponding polyacid-modified composite resins Hytac (HTC), Dyract AP (DAP) and Compoglass F (CGF), respectively. METHODS: Ten cylindrical specimens (6mm diameter and 3mm thick) of each polyacid-modified composite were prepared according to the manufacturers' instructions: five with bonding agent applied and five without bonding agent as a control. The specimens were immersed individually in 10ml ultra-pure water at 37 degrees C immediately after light-curing of the polyacid-modified composite resins. Over 140 days, the water was regularly renewed and the fluoride concentration eluted during each period was determined with a combined fluoride ion selective electrode. RESULTS: The fluoride release decreases according to the sequence: CGF>DAP>HTC. The bonding agent significantly reduces the fluoride released by DAP and CGF, respectively, by a factor 2-3 and +/-1.4. For HTC, the bonding agent reduces the fluoride released initially by a factor of +/-2, but the difference between the fluoride release with and without bonding agent becomes insignificant after approximately 3 weeks. SIGNIFICANCE: It can be concluded that the use of bonding agent can significantly reduce fluoride release of polyacid-modified composite resins in the long-term, and especially in the short-term. The decrease in fluoride release might reduce the material's potential to prevent recurrent caries.
    [Abstract] [Full Text] [Related] [New Search]