These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Experience with an up-flow biological aerated filter (BAF) for tertiary treatment: from pilot trials to full scale implementation.
    Author: Payraudeau M, Pearce AR, Goldsmith R, Bigot B, Wicquart F.
    Journal: Water Sci Technol; 2001; 44(2-3):63-8. PubMed ID: 11548022.
    Abstract:
    Biofilters can be added to existing non-nitrifying activated sludge plants for tertiary ammonia removal and effluent polishing. It is a convenient, efficient, and cost effective way of meeting more stringent consents. In order to prove this technology, a biofilter pilot plant was installed in a large activated sludge plant with challenging conditions, since almost half of the load is industrial effluent and the water temperature can be as low as 7 degrees C. Trials were conducted over a two year period, providing the following information: low water temperature does not affect the process; the optimum rise rate at nominal flow is 8.5 m/h for this wastewater; the consent can be achieved for ammonia loads up to 0.94 kgNH4N/M3 media/day; about 50% of the post-secondary TSS and BOD can be removed in the BAF; a large proportion of industrial effluent has not had any noticeable effect on the beads after two years. A full scale plant with a nominal flow of 8257 l/s was then built and commissioned in summer 1998. Seeding was completed within three weeks of starting the filters. Two months later, a 28 day takeover was started. Results obtained on full scale plant during and after this test confirm the results obtained on the pilot.
    [Abstract] [Full Text] [Related] [New Search]