These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Bond strengths of orthodontic brackets to restorative resin composite surfaces.
    Author: Lai PY, Woods MG, Tyas MJ.
    Journal: Aust Orthod J; 1999 Apr; 15(4):235-45. PubMed ID: 11933358.
    Abstract:
    In orthodontic practice, it is not uncommon to bond brackets to resin composite restorations. With this in mind, this study was designed to compare first the shear/peel strengths of metal, ceramic and polycarbonate brackets bonded to microfilled resin composite (RC), using either a light-cured resin-modified glass ionomer cement (Fuji Ortho LC), a chemical-cured composite (System 1+) or a light-cured composite adhesive (Transbond XT); and then to examine the effects of thermocycling on the shear/peel strengths of these systems. Four different brackets were used: two stainless steel (Victory and Optimesh), one ceramic (Transcend 6000) and one polycarbonate (Spirit MB). Seventy-two specimens of each bracket were divided into three groups for bonding with one of the three adhesives. Half the specimens from each group were also thermocycled. Mean shear/peel bond strengths were found to be significantly different for the four different brackets, although not influenced by the three adhesives used within each group. All groups were found to have clinically-acceptable mean bond strengths, except for Spirit MB-System 1+. After thermocycling, both Optimesh-Transbond XT and Victory-System 1+ groups showed superior mean bond strengths (26.8 and 24.4 MPa, respectively) when compared with all other groups (p < 0.05). Applying the Weibull survival analysis for groups utilising Victory, Transcend 6000 and Spirit MB brackets, those with 90 per cent or greater probabilities of survival included Victory-System 1+, Transcend 6000-Fuji Ortho LC, Victory-Fuji Ortho LC and Spirit MB-Transbond XT groups. In all groups, bond failure was mainly (64 per cent) cohesive within the RC restorative surface. The thermocycled Spirit MB-Transbond XT group had the highest frequency of undamaged RC failure interfaces. Despite the focus of this study being on bond strength and the potential for surface damage, it was noted that these properties should always be considered alongside other factors such as the strength of the bracket itself, friction within the bracket slot, patients' wishes, cost of the materials and the presenting malocclusion.
    [Abstract] [Full Text] [Related] [New Search]