These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Real time control of a combined UASB-activated sludge wastewater treatment configuration.
    Author: Poiito-Braga CM, von SM, Braga AR, Pena RT.
    Journal: Water Sci Technol; 2002; 45(4-5):279-87. PubMed ID: 11936644.
    Abstract:
    This paper presents a combined wastewater treatment configuration composed by an Upflow Anaerobic Sludge Blanket (UASB) reactor followed by an Activated Sludge (AS) system. A control strategy has been developed for this innovative (especially for domestic sewage) treatment configuration and tested in a real pilot-scale system called STEPAA-Wastewater Treatment System by Anaerobic and Aerobic Processes. The proposed UASB-AS control strategy, including fault detection and recovery, and its successful implementation in real time is presented. This novel control strategy was developed to keep the final effluent suspended solids concentration in the range specified by the State environmental agency, in spite of incoming load disturbances. The control strategy is based on two cascaded PI (Proportional + Integral) controllers, which manipulates the recycling rate into the AS-reactor to control the effluent suspended solids concentration. A 2-dimensional nonlinear mapping (an empirical look-up table), which gives the sludge waste rate as a function of the influent flowrate and AS-reactor biomass concentration, is used to keep the AS-reactor biomass concentration in a range that guarantees a good substrate removal without inconveniences to the AS-settler operation (and consequently to the solids removal). Experimental results are provided to demonstrate the system performance.
    [Abstract] [Full Text] [Related] [New Search]