These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Tensile bond strengths of composites to a gold-palladium alloy after thermal cycling.
    Author: Chang JC, Koh SH, Powers JM, Duong JH.
    Journal: J Prosthet Dent; 2002 Mar; 87(3):271-6. PubMed ID: 11941353.
    Abstract:
    STATEMENT OF PROBLEM: Many different materials and methods have been used to fabricate or repair veneer facings with composites, but only a few of these have been studied. PURPOSE: This study compared the tensile bond strengths of composites to a gold-palladium alloy with the use of several surface treatment methods. MATERIAL AND METHODS: Forty alloy specimens were cast in Eclipse (52% gold and 37.5% palladium) in the form of truncated cones. These specimens were divided equally into 4 groups. In group I, the bonding surfaces of the metal cones were treated with Silicoater MD. Truncated cones of Dentacolor composite were bonded to the metal surfaces and light-polymerized. In group II, the bonding surfaces of the metal cones were air-particle abraded with 50 microm aluminum oxide and coated with C&B Metabond. Truncated cones of Epic-TMPT composite were bonded to the metal surfaces and light-polymerized. In group III, the bonding surfaces of the metal cones were air-particle abraded with CoJet-Sand. Truncated cones of Pertac-Hybrid composite were bonded to the metal surfaces and light-polymerized. In group IV, the bonding surfaces of the metal cones were air-particle abraded with CoJet-Sand. Truncated cones of Visio-Gem were bonded to the metal surfaces and light-polymerized. After 24 hours of water immersion at 37 degrees C and 1000 thermal cycles in water at 5 degrees C and 55 degrees C, tensile forces were applied to all specimens with a universal testing machine. Analysis of variance was applied to the data (P<.05), and differences among means were determined with a Tukey-Kramer interval of 5.4 MPa. RESULTS: Tensile bond strengths in MPa were as follows: Dentacolor, 14 +/- 5; Epic-TMPT, 12 +/- 4; Pertac-Hybrid, 13 +/- 5; and Visio-Gem, 18 +/- 4. The tensile bond strength of Visio-Gem was significantly higher than that of Epic-TMPT, but no differences were found among Dentacolor, Pertac-Hybrid, and Epic-TMPT (P<.05). CONCLUSION: Within the limitations of this study, all 4 bonding systems tested produced high bond strengths between composites and a gold-palladium alloy after thermal cycling.
    [Abstract] [Full Text] [Related] [New Search]