These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Finite element modeling of electromagnetic signal propagation in a phantom arm.
    Author: Kuiken TA, Stoykov NS, Popović M, Lowery M, Taflove A.
    Journal: IEEE Trans Neural Syst Rehabil Eng; 2001 Dec; 9(4):346-54. PubMed ID: 12018647.
    Abstract:
    Improving the control of artificial arms remains a considerable challenge. It may be possible to graft remaining peripheral nerves in an amputated limb to spare muscles in or near the residual limb and use these nerve-muscle grafts as additional myoelectric control signals. This would allow simultaneous control of multiple, degrees of freedom (DOF) and could greatly improve the control of artificial limbs. For this technique to be successful, the electromyography (EMG) signals from the nerve-muscle grafts would need to be independent of each other with minimal crosstalk. To study EMG signal propagation and quantify crosstalk, finite element (FE) models were developed in a phantom-arm model. The models were validated with experimental data collected by applying sinusoidal excitations to a phantom-arm model and recording the surface electric potential distribution. There was a very high correlation (r > 0.99) between the FEM data and the experimental data, with the error in signal magnitude generally less than 5%. Simulations were then performed using muscle dielectric properties with static, complex, and full electromagnetic solvers. The results indicate that significant displacement currents can develop (> 50% of total current) and that the fall-off of surface signal power varies with how the signal source is modeled. Index Terms-Control, electromyography (EMG), finite element (FE), modeling, prosthesis.
    [Abstract] [Full Text] [Related] [New Search]