These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Non-woven fabric filter separation activated sludge reactor for domestic wastewater reclamation.
    Author: Seo GT, Moon BH, Lee TS, Lim TJ, Kim IS.
    Journal: Water Sci Technol; 2003; 47(1):133-8. PubMed ID: 12578185.
    Abstract:
    A non-woven fabric filter was experimentally evaluated for solid-liquid separation in an activated sludge reactor as an alternative membrane. A polypropylene fabric filter (70, 50 and 35 g/m2) was used for the experiment. The pilot system was operated in A/O (Anaerobic/Oxic) type in which the filter module was submerged into the oxic compartment. The filtration module consists of 10 plate type rectangular filter elements with effective filtration area, 2 m2. Gravity filtration was carried out for solid-liquid separation by changing the water head 0.05-0.5 m without backwashing during the system operation. Initial permeate flux was set at 0.4 m/d. C/N ratio of raw wastewater was controlled at 4.5 in terms of BOD/T-N. The fabric filter system showed a good performance enough for domestic wastewater treatment. Effluent solid concentration was 3.2 mg/L (93.5% removal). COD removal efficiency was 91.6% producing an effluent concentration around 13 mg/L. 66% of total nitrogen removal could be obtained at the adjusted C/N ratio of influent wastewater. However phosphorus removal was very low at 23%. It was found that the initial flux of 0.4 m/d should be maintained for stable performance of the system.
    [Abstract] [Full Text] [Related] [New Search]