These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Field trials of no-decompression stop limits for diving at 3500 m.
    Author: Egi SM, Gürmen NM, Aydin S.
    Journal: Aviat Space Environ Med; 2003 Mar; 74(3):228-35. PubMed ID: 12650269.
    Abstract:
    INTRODUCTION: In 1990, Boğaziçi University (Istanbul, Turkey) launched an altitude diving program to develop techniques and safe decompression profiles for diving at high terrestrial altitudes. Following pioneering diving expeditions to lakes at high elevations in 1990-1992, it was deemed necessary to calculate new tables. METHODS: Bottom time limits for dives requiring no decompression stops (no-d) were calculated for 3500 m using linear extrapolation of U.S. Navy M-values decreased by 4 ft of sea water (M4 limits). These limits were tested for 15, 18, 21, 24, 27, and 30 m of depth by diving in the Great Sea Lake at Mt Kaçkar (3412 m) with 10 dives per profile. RESULTS: The mean decompression sickness (DCS) risk estimated from precordial bubble scores (Spencer Scale) ranged from 0.3% to 2.8% per profile. After three expeditions, 165 dives had been achieved with a cumulative bottom time of 3199 min. No DCS occurred in dives that adhered to the M4 no-d limits. However, two cases of Type I and one case of Type II DCS were encountered where the divers accidentally exceeded those limits. DISCUSSION: Considering the estimated risk of DCS and the relatively small number of trials, a more conservative approach was used to develop a final set of high altitude dive tables. This conclusive approach used continuous compartment half-lives. It is based on fitting a surface of allowable supersaturation limits using the empirical M-values from existing tables as well as our altitude diving data, together with an added constraint that forces calculated M-values to stay below the available M-value data.
    [Abstract] [Full Text] [Related] [New Search]