These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.
Pubmed for Handhelds
PUBMED FOR HANDHELDS
Search MEDLINE/PubMed
Title: Evaluation of succinic acid continuous and repeat-batch biofilm fermentation by Actinobacillus succinogenes using plastic composite support bioreactors. Author: Urbance SE, Pometto AL, Dispirito AA, Denli Y. Journal: Appl Microbiol Biotechnol; 2004 Nov; 65(6):664-70. PubMed ID: 15205933. Abstract: Continuous and repeat-batch biofilm fermentations using Actinobacillus succinogenes were performed with immobilized and suspended-cell systems. For the immobilized continuous system, plastic composite supports (PCS) containing 50% (w/w) polypropylene (PP), 35% (w/w) ground soybean hulls, 5% (w/w) dried bovine albumin, 2.5% (w/w) soybean flour, 2.5% (w/w) yeast extract, 2.5% (w/w) dried red blood cells, and 2.5% (w/w) peptone, or PP tubes (8.5 cm in length) were arranged around the agitator shaft in a grid formation. Agitation was controlled at 125 rpm and 150 rpm. Samples were taken at dilution rates of 0.2, 0.4, 0.6, 0.8, 1.0, and 1.2 h(-1) and analyzed for succinic acid production and glucose consumption (g l(-1)). For PCS bioreactors, the highest final succinic acid concentrations (10.1 g (-1), 10.4 g l(-1)) and percentage yields (62.6%, 71.6%) occurred at the dilution rate of 0.2 h(-1). PCS disks were evaluated in a repeat-batch biofilm reactor. Suspended-cell batch fermentations were performed in flasks and a repeat-batch bioreactor. The maximum concentration of succinic acid produced was 40 g l(-1). Peak succinic acid percentage yields in continuous and repeat-batch fermentations of A. succinogenes were observed in suspended-cell continuous fermentations at a dilution rate of 1.0 h(-1) (76.2%) and in PCS repeat-batch fermentations with an initial glucose concentration of 40 g l(-1) (86.7%).[Abstract] [Full Text] [Related] [New Search]