These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Intraparticle diffusion and adsorption of arsenate onto granular ferric hydroxide (GFH).
    Author: Badruzzaman M, Westerhoff P, Knappe DR.
    Journal: Water Res; 2004 Nov; 38(18):4002-12. PubMed ID: 15380990.
    Abstract:
    Porous iron oxides are being evaluated and selected for arsenic removal in potable water systems. Granular ferric hydroxide, a typical porous iron adsorbent, is commercially available and frequently considered in evaluation of arsenic removal methods. GFH is a highly porous (micropore volume approximately 0.0394+/-0.0056 cm(3)g(-1), mesopore volume approximately 0.0995+/-0.0096 cm(3)g(-1)) adsorbent with a BET surface area of 235+/-8 m(2)g(-1). The purpose of this paper is to quantify arsenate adsorption kinetics on GFH and to determine if intraparticle diffusion is a rate-limiting step for arsenic removal in packed-bed treatment systems. Data from bottle-point isotherm and differential column batch reactor (DCBR) experiments were used to estimate Freundlich isotherm parameters (K and 1/n) as well as kinetic parameters describing mass transfer resistances due to film diffusion (k(f)) and intraparticle surface diffusion (D(s)). The pseudo-equilibrium (18 days of contact time) arsenate adsorption density at pH 7 was 8 microg As/mg dry GFH at a liquid phase arsenate concentration of 10 microg As/L. The homogeneous surface diffusion model (HSDM) was used to describe the DCBR data. A non-linear relationship (D(S)=3.0(-9) x R(p)(1.4)) was observed between D(s) and GFH particle radius (R(P)) with D(s) values ranging from 2.98 x 10(-12) cm(2)s(-1) for the smallest GFH mesh size (100 x 140) to 64 x 10(-11) cm(2)s(-1) for the largest GFH mesh size (10 x 30). The rate-limiting process of intraparticle surface diffusion for arsenate adsorption by porous iron oxides appears analogous to organic compound adsorption by activated carbon despite differences in adsorption mechanisms (inner-sphere complexes for As versus hydrophobic interactions for organic contaminants). The findings are discussed in the context of intraparticle surface diffusion affecting packed-bed treatment system design and application of rapid small-scale column tests (RSSCTs) to simulate the performance of pilot- or full-scale systems at the bench-scale.
    [Abstract] [Full Text] [Related] [New Search]