These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Comparative in vitro performance evaluation of the Novopulmon 200 Novolizer and Budesonid-ratiopharm Jethaler: two novel budesonide dry powder inhalers.
    Author: de Boer AH, Gjaltema D, Hagedoorn P, Frijlink HW.
    Journal: Pharmazie; 2004 Sep; 59(9):692-9. PubMed ID: 15497751.
    Abstract:
    A special single dose collector and a multi stage liquid impinger were used to assess the consistency of delivered dose and fine particle fraction respectively, of the Novopulmon 200 Novolizer (Viatris, Frankfurt, Germany) and Budesonid-ratiopharm Jethaler (Ratiopharm, Ulm, Germany). The obtained average delivered dose from the Jethaler at 4 kPa is 199 microg (99.5% of the label claim) versus 219 microg (109.6%) for the Novolizer (mean of 90 doses from the same device). The corresponding relative standard deviation (RSD) for the Jethaler is on average 14.05% (maximal and minimal dose are 289 and 148 microg respectively), versus an RSD of 5.56% for the Novolizer (max. is 240; min. is 187 microg). It can be shown that the rather extreme spread in the delivered dose from the Jethaler is caused by a variation in metered mass, and to less extent by a poor content uniformity of the drug-lactose compact. The fine particle fractions (FPFs, as percent of label claim, for particles <5.1 microm) of both devices show an increase with increasing pressure drop across the inhalers, although at 4 kPa already 62% (Jethaler), respectively 72% (Novolizer) of the 'maximal' value (at 8 kPa) is achieved. FPF from the Novolizer is highest at all pressure drops and varies between 23.2% (at 2 kPa) and 54.3% (at 8 kPa). The difference in FPF between both devices increases with decreasing upper class for the FPF: the ratio of FPF from Novolizer to that from Jethaler (at 4 kPa) is 1.42 for particles < 5.1 microm versus 2.14 for particles < 1.8 microm, suggesting that the aerosol produced by the Novolizer has much greater potential for deep lung deposition.
    [Abstract] [Full Text] [Related] [New Search]