These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Color stability of resin cements after accelerated aging.
    Author: Lu H, Powers JM.
    Journal: Am J Dent; 2004 Oct; 17(5):354-8. PubMed ID: 15575448.
    Abstract:
    PURPOSE: To study the color stability of different resin cements after accelerated aging. METHODS: The color stability of a self-adhesive resin cement (Unicem), one resin-based composite cement (Variolink II), one compomer cement (Principle) and one hybrid ionomer cement (FujiCEM) was studied. Two curing modes of Unicem (self-cured and dual-cured) and Variolink II (light-cured and dual-cured) were also tested. Specimen disks (n = 5) were prepared with a polytetrafluoroethylene split mold and subjected to accelerated aging for 150, 300 and 450 kJ/m2. Color (CIELAB system) was measured before and after each of the three aging cycles on a reflection spectrophotometer. deltaE*, deltaL*, deltaC* and deltaH* were calculated and analyzed by ANOVA. RESULTS: The largest color change occurred during the first 150 kJ/m2 aging cycle, where deltaE* values ranged from 5.6 to 20.5 with Principle showing the least color change and FujiCEM the most. The color changes of all the tested materials were perceptible. The greatest changes were recorded for deltaL* and/or deltaC*. All specimens became significantly rougher and showed evidence of cracking and degradation after aging except Variolink II.
    [Abstract] [Full Text] [Related] [New Search]