These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.
Pubmed for Handhelds
PUBMED FOR HANDHELDS
Search MEDLINE/PubMed
Title: Factors affecting psychophysical tuning curves for hearing-impaired subjects with high-frequency dead regions. Author: Kluk K, Moore BC. Journal: Hear Res; 2005 Feb; 200(1-2):115-31. PubMed ID: 15668043. Abstract: A dead region (DR) is a region of the cochlea where there are no functioning inner hair cells and/or neurons. DRs can be detected using the threshold-equalizing-noise (TEN) test, but psychophysical tuning curves (PTCs) are sometimes used to give a more precise estimate of the edge frequency of a DR; a shifted tip of the PTC indicates a DR. We show here that the shapes of PTCs for hearing-impaired subjects can be influenced by the detection of beats and simple difference tones (SDTs). As a result, PTCs can have tips at f(s), even when f(s) falls in a DR. PTCs were measured for subjects with mild to moderate low-frequency and severe high-frequency hearing loss using sinusoidal and narrowband noise maskers (80-, 160-, 320-Hz wide): (1) in quiet; (2) in the presence of additional lowpass filtered noise (LF noise) designed to mask SDTs; (3) in the presence of a pair of low-frequency tones designed to interfere with the detection of beats (MDI tones). In condition (1), the PTCs were often W-shaped, with a sharp tip at f(s). This occurred less for the wider noise bandwidths. For subjects with good low-frequency hearing, the LF noise often reduced or eliminated the tip at f(s), suggesting that this tip was partly caused by detection of SDTs. For the sinusoidal and 80-Hz wide noise maskers, the addition of the MDI tones reduced the masker level required for threshold for masker frequencies adjacent to f(s), for nearly all subjects, suggesting a strong influence of beat detection. To minimize the influence of beats, we recommend using noise maskers with a bandwidth of 160 or (preferably) 320 Hz. In cases of near-normal hearing at low frequencies, we recommend using an additional LF noise to mask SDTs.[Abstract] [Full Text] [Related] [New Search]