These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Shear bond strength of four core materials to dentin bonded with light-cured or dual-cured adhesive.
    Author: Castellon P, Burgess JO.
    Journal: Am J Dent; 2004 Dec; 17(6):401-3. PubMed ID: 15724749.
    Abstract:
    PURPOSE: To measure and compare the shear bond strength of four core materials to dentin bonded with one adhesive (Prime and Bond NT) that was either light-cured or dual-cured. METHODS: The dentin of 80 freshly extracted molars was exposed using a series of abrasive disks. The teeth were divided into eight equal groups, etched with phosphoric acid for 15 seconds and rinsed. Dentin was dried to a moist surface. On 40 teeth, Prime and Bond NT was applied and light-cured for 30 seconds. On 40 teeth, Prime and Bond NT was mixed with the self-cure additive, which was applied to the dentin, and light-cured for 20 seconds. The core materials were then placed following manufacturers' directions onto the cured adhesive. The core material was light-cured, when it was necessary, for 60 seconds and stored for 24 hours in water at room temperature. The specimens were loaded in shear in the Instron until failure at a 5 mm/minute crosshead speed. Data were compared using two factor ANOVA and Tukey's HSD test (P = .05). RESULTS: Both curing mode and core material showed a significant difference. A significant difference between mean shear bond strength for dual and light cured was observed only in CompCore (P = 0.0002). There was no statistical difference when Prime and Bond NT dual-cured was used with chemical- or dual-cured materials.
    [Abstract] [Full Text] [Related] [New Search]