These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Evaluation of misting controls to reduce respirable silica exposure for brick cutting.
    Author: Beamer BR, Shulman S, Maynard A, Williams D, Watkins D.
    Journal: Ann Occup Hyg; 2005 Aug; 49(6):503-10. PubMed ID: 15845608.
    Abstract:
    It is estimated that more than 1.7 million workers in the United States are potentially exposed to respirable crystalline silica, with a large percentage having been exposed to silica concentrations higher than the limits set by current standards and regulations. The purpose of this study is to characterize the use of water-misting engineering controls to reduce exposure to respirable crystalline silica for construction workers engaged in the task of brick cutting. Since data concerning the efficacy of engineering controls collected at worksites is often confounded by factors such as wind, worker skill level, the experiments were conducted in a laboratory environment. A completely enclosed testing chamber housed the brick-cutting saw. Respirable dust concentrations were measured using the Model 3321 Aerodynamic Particle Sizer. Specifically, the laboratory experiment was designed to compare dust suppression through water misting using conventional freely flowing water techniques. Brass atomizing nozzles with three flow rates were used for making this comparison: low (5.0 ml s(-1) or 4.8 gal h(-1)), medium (9.0 ml s(-1) or 8.6 gal h(-1)) and high (18 ml s(-1) or 17.3 gal h(-1)). The flow rate for freely flowing water, using manufacturer-supplied equipment, was 50 ml s(-1) (48 gal h(-1)). The experiment consisted of five replications of five samples each (low-misting, medium-misting, high-misting, freely flowing water and no control). The order of sampling within each replicate was randomized. Estimates of dust reduction showed that low-misting nozzles reduced the respirable mass fraction of dust by about 63%, medium-misting nozzles by about 67%, high-misting nozzles by about 79% and freely flowing water by about 93%. Based on these results, it may be feasible to use misting to control respirable silica dust instead of freely flowing water. This strategy is of practical interest to the construction industry which must frequently limit the amount of water used on construction sites.
    [Abstract] [Full Text] [Related] [New Search]