These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: The mechanical integrity of in vivo engineered heterotopic bone.
    Author: Warnke PH, Springer IN, Acil Y, Julga G, Wiltfang J, Ludwig K, Russo PA, Sherry E, Sivananthan S, Hedderich J, Terheyden H.
    Journal: Biomaterials; 2006 Mar; 27(7):1081-7. PubMed ID: 16120459.
    Abstract:
    Recent advances in tissue engineering have aroused interest in growth of heterotopic bone for the repair of skeletal defects. This study demonstrates an in vivo method in minipigs of engineering individual human-sized mandible replacements of heterotopic bone with a mechanical integrity similar to natural bone. Ten individualized mandible replacement scaffolds were created using computer-aided design (CAD) techniques. Five had a resorbable external scaffold made of polylactite mesh (test group 1) and five had had a non-resorbable external scaffold of titanium mesh (test group 2). The mesh scaffolds were loaded each with five BioOss blocks serving as internal scaffolds and 3.5 mg recombinant human Bone Morphogenetic Protein-7. The loaded mesh scaffolds were implanted into the latissimus dorsi muscles of five infant minipigs. After 6 weeks the mandible replacements were harvested. Core biopsy cylinders were taken from the replacements of both test groups and from the natural pig mandibles (control 1). Also, core biopsies from plain BioOss Blocks were gained (control 2). The core biopsy cylinders were loaded axially into a compression test device to evaluate the mechanical compression resistance. Additional specimen underwent histological examination. Both test groups resulted in successful bone induction with degrees of compression resistance [Test 1: 1.62 MPa (SD+/-0.73); Test 2: 1.51 MPa (SD+/-0.56)] statistically insignificant when compared to natural porcine mandibular bone [1.75 MPa (SD+/-0.69)]. This differed significantly from the much lower compression resistance seen in the unadulterated BioOss [0.92 MPa (SD+/-0.04)]. Following this, the in vivo engineered bone has a similar mechanical compression stability as natural bone.
    [Abstract] [Full Text] [Related] [New Search]