These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Conventional and high-intensity halogen light effects on polymerization shrinkage of orthodontic adhesives.
    Author: Sener Y, Uysal T, Basciftci FA, Demir A, Botsali MS.
    Journal: Angle Orthod; 2006 Jul; 76(4):677-81. PubMed ID: 16808577.
    Abstract:
    The objectives of this study were to compare the polymerization shrinkage of three orthodontic adhesives. In addition we wanted to determine the effectiveness of the high-intensity quartz tungsten halogen (HQTH) in curing orthodontic adhesives on polymerization shrinkage with that of the quartz tungsten halogen (QTH). A total of 120 glass ring molds were prepared using a low-speed saw. The internal surface of the glass rings were roughened and etched. Adhesive pastes were placed into the glass molds, which were sandwiched between two glass slides. Samples were divided into six groups according to the combination of three orthodontic adhesives (Kurasper F, Light Bond, and Transbond XT) and two light intensities. One half of each 40 samples of three adhesive pastes was polymerized for 20 seconds by a QTH (Hilux 350), and the other half was polymerized for 10 seconds by a HQTH (Optilux 501). The volumetric polymerization shrinkage for each system was measured through the specific density method modified by Puckett and Smith. Statistical analysis was performed using two-way analysis of variance for intergroup comparisons. The HQTH-curing unit resulted in a more polymerization shrinkage than did the QTH for all investigated adhesives. However, no statistically significant differences were found. The highest shrinkage was observed for Light Bond cured with HQTH (1.59 +/- 0.82%), and the lowest value was observed for Transbond XT cured with QTH (1.23 +/- 0.60%). There are no significant differences in polymerization shrinkage of the three investigated orthodontic adhesives when polymerized with a QTH or a HQTH.
    [Abstract] [Full Text] [Related] [New Search]