These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: 239+240Pu concentration and isotope ratio (240Pu/239Pu) in aerosols during high dust (Yellow Sand) period, Korea.
    Author: Choi MS, Lee DS, Choi JC, Cha HJ, Yi HI.
    Journal: Sci Total Environ; 2006 Oct 15; 370(1):262-70. PubMed ID: 16962162.
    Abstract:
    Concentration and isotope ratio of Pu were analyzed for aerosols collected at Anmyeondo located in the western coast of Korea using multiple collector inductively coupled plasma mass spectrometer equipped with desolvated micro-concentric nebulizer. Aerosols were collected from June 2001 to April 2002 using high volume air sampler. The samples consist of high dust samples (Yellow Sand), and also low dust samples; maximum Al concentration was 74.2 microg/m(3) and minimum was 0.17 microg/m(3). Pu was concentrated using 0.1 ml TEVA resin columns after conc. HNO(3) extraction. Isotope dilution using (242)Pu spike and mass bias correction using (233)U and (236)U mixed solution enabled the quantification of Pu and measurement of isotope ratio simultaneously. The contribution of (238)U from both spikes and samples was minimized by careful chemical separation and optimization of spike concentration. The (238)U(1)H and tail contribution on (239)Pu peak were about 0.75 x 10(-5) and 1 x 10(-5) of (238)U intensity, respectively, and they were corrected from (239)Pu using externally determined ((238)U(1)H + tailing)/(238)U ratio and (238)U measurement during acquisition. The detection limits of this analytical procedure were 0.61 fg/ml and 0.56 fg/ml for (239)Pu and (240)Pu, respectively (4 nBq/m(3) and 12 nBq/m(3) for (239)Pu and (240)Pu, respectively). The precision of isotope ratio measurement was better than 2% for larger quantity than 20 fg of (239)Pu. In spring, maximum concentration of 0.580 microBq/m(3) for (239)Pu and 0.404 microBq/m(3) for (240)Pu was observed when Al concentration was maximum, so called as Yellow Sand event. Pu concentrations in aerosols are well correlated with Al, a tracer of soil dust. The ratios of Pu/Al were 0.0082 (microBq/microg) and 0.0055 (microBq/microg) for (239)Pu/Al and (240)Pu/Al, respectively. Isotope ratios of Pu ((240)Pu/(239)Pu) in Yellow Sand samples show 0.191+/-0.014 close to those of global fallout. These facts indicate that Yellow Sand plays an important role in the behavior of Pu in the environment like other concomitant metals such as Al, Fe etc.
    [Abstract] [Full Text] [Related] [New Search]