These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Brushing-induced surface roughness of nickel-, palladium-, and gold-based dental casting alloys.
    Author: Wataha JC, Lockwood PE, Messer RL, Lewis JB, Mettenburg DJ.
    Journal: J Prosthet Dent; 2008 Jun; 99(6):455-60. PubMed ID: 18514667.
    Abstract:
    STATEMENT OF PROBLEM: Alloys with high nickel content have been increasingly used for dental prostheses. These alloys have excellent hardness, elastic modulus, and strength, yet have high corrosion rates when exposed to chemical or physical forces that are common intraorally. PURPOSE: The purpose of the current study was to measure the susceptibility of several types of nickel-based alloys to brushing abrasion relative to gold- and palladium-based alloys. MATERIAL AND METHODS: Au-Pt, Au-Pd, Pd-Ag, Ni-Cr, and Ni-Cr-Be dental alloys were brushed with a toothbrush (Oral-B Soft) and toothpaste (Ultrabrite) in a linear brushing machine, then the surface roughness was measured by profilometry (R(a), R(v), R(p)). Specimens (n=4) were brushed for 48 hours in a saline solution (pH 7). The effect of brushing was determined using 2-sided t tests (alpha=.05), and roughness among alloys postbrushing was compared using 1-way ANOVA with Tukey post hoc analyses (alpha=.05). RESULTS: All polished alloy surfaces (before brushing) had roughnesses of <or=0.1 microm (R(a)). The Pd-Ag alloy was the most resistant to brushing. The Ni-Cr-Be alloy abraded the most, with a postbrushing surface roughness of >1 microm (R(a)). Ni-Cr alloys without Be had a postbrushing surface roughness of 0.25 microm (R(a)). Postbrushing roughness of all other alloys ranged from 0.1-0.25 microm (R(a)). R(v) and R(p) values behaved similarly to R(a) values for all alloys. CONCLUSIONS: Although they have many excellent mechanical properties, Ni-Cr-Be alloys may be prone to degradation from brushing.
    [Abstract] [Full Text] [Related] [New Search]