These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Interaction forces between silica surfaces in aqueous solutions of cationic polymeric flocculants: effect of polymer charge.
    Author: Zhou Y, Gan Y, Wanless EJ, Jameson GJ, Franks GV.
    Journal: Langmuir; 2008 Oct 07; 24(19):10920-8. PubMed ID: 18729484.
    Abstract:
    Three cationic polymers with molecular weights and charge density of 3.0 x 10(5) g/mol and 10% (D 6010), 1.1 x 10(5) g/mol and 40% (D6040), and 1.2 x 10(5) g/mol and 100% (D6099) were investigated in aqueous NaCl solutions in the presence of silica. The atomic force microscope (AFM) colloidal probe technique was used to determine silica interparticle interaction forces, which were compared to macroscopic information on the strength of interactions such as compressive yield stress measurements. It was found that in 30 mM NaCl solution the 10% charged polymer produced steric repulsion upon approach and long-range adhesion with multiple pull off events upon retraction at the optimum flocculation concentration. This suggests that the polymer was adsorbed in a conformation where segments extend from the surface, resulting in bridging flocculation. The 40 and 100% charged polymers produced attraction upon approach and strong adhesion with snap out from contact upon separation at optimum polymer dosages. This suggests that these polymers are adsorbed with flat conformations and is typical of charge neutralization or patch attraction. The attractions for 40 and 100% charged polymers measured with the AFM are significantly larger than for the 10% charged polymer. The polymer dose that produced the optimum flocculation and the maximum compressive yield stress typically corresponded to the polymer concentration that produced the maximum adhesion for each polymer. It was found that the magnitude of the adhesive force was more significant in determining the compressive yield stresses of the silica particle sediments than the aggregate size and structure.
    [Abstract] [Full Text] [Related] [New Search]