These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Influence of water storage time on the bond strength of etch-and-rinse and self-etching adhesive systems.
    Author: Dantas DC, Ribeiro AI, Lima LH, de Lima MG, Guênes GM, Braz AK, Braz R.
    Journal: Braz Dent J; 2008; 19(3):219-23. PubMed ID: 18949294.
    Abstract:
    The purpose of this study was to evaluate comparatively the shear bond strength (SBS) of etch-and-rinse (Adper Scotch Bond Multi Purpose--ASBMP and Adper Single Bond 2--ASB2) and self-etching (AdheSe--AD and Adper Prompt--AP) adhesive systems after short- and long-term water storage. Eighty bovine teeth were randomly assigned to 4 groups (n=20, 10 teeth for 24 h and 10 for 6 months). After surface treatment, composite resin cylinders were made with Tetric Ceram using a bisected metallic matrix. The specimens were stored in distilled water at 37 degrees C for either 24 h or 6 months. After these periods, shear strength was assessed in a universal testing machine (0.5 mm/min). Data were submitted to ANOVA and F test at 5% significance level. Mean SBSs (MPa) for ASBMP (10.03 +/- 3.78) and ASB2 (6.10 +/- 2.67) showed no statistically significant differences (p>0.05) between times. The self-etching systems did not differ significantly from each other within the 24-h period, but significant difference was found for AD (1.37 +/- 0.64) after 6 months of water storage. In conclusion, the tested etch-and-rinse systems had a better performance in terms of bond durability over time than the self-etching systems.
    [Abstract] [Full Text] [Related] [New Search]