These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Evaluation of a hybrid constructed wetland for treating domestic sewage from individual housing units surrounding agricultural villages in South Korea.
    Author: Seo DC, DeLaune RD, Park WY, Lim JS, Seo JY, Lee DJ, Cho JS, Heo JS.
    Journal: J Environ Monit; 2009 Jan; 11(1):134-44. PubMed ID: 19137149.
    Abstract:
    The treatment efficiency of 2- and 3-stage constructed wetlands (CWs) was evaluated for treating domestic sewage from houses surrounding agricultural villages. The optimum depth of filter media was 90 cm. The optimum volume ratio of vertical flow (VF) and horizontal flow (HF) beds was 1:2, and the optimum filter medium was broken stone in the VF-HF 2-stage hybrid CWs. Based on the above optimum conditions, removal efficiency of biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solids (SS), total nitrogen (T-N), and total phosphorus (T-P) were 99, 98, 99, 68, and 72%, respectively. However to utilize constructed wetlands (CWs) for treating domestic sewage for an individual house, would require downsizing of the 2-stage hybrid CWs. In addition, the low removal efficiency of T-N and T-P in 2-stage hybrid CWs would require improvements necessary to meet acceptable water quality discharge standards. Thus, to reduce the CWs' area and improve the T-N and T-P removal efficiencies, VF-HF 2-stage hybrid CW was modified into VF/HF(I)-HF(II) and VF/HF(I)-HF(III) 3-stage hybrid CW. The optimum reduced size of 3-stage hybrid CW was the VF/HF(I)-HF(II) configuration which also increased T-N removal. Using this system, removal efficiency of BOD, COD, SS, T-N, and T-P were 99, 98, 99, 83, and 75%, respectively. In VF/HF(I)-HF(II) CW, the removal velocity of BOD, COD and SS was rapid on the order of VF (1st stage) >> HF(II) (3rd stage) > or = HF(I) (2nd stage), VF (1st stage) >> HF(II) (3rd stage) > HF(I) (2nd stage) and VF (1st stage) >> HF(I) (2nd stage) > HF(II) (3rd stage), respectively. The removal velocity of T-N and T-P in VF/HF(I)-HF(II) CWs was rapid on the order of HF(I) (2nd stage) > HF(II) (3rd stage) > or = VF (1st stage) and VF (1st stage) > HF(I) (2nd stage) > HF(II) (3rd stage), respectively.
    [Abstract] [Full Text] [Related] [New Search]