These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: [Simultaneous determination of water-soluble components and nerolidol in xiangdan injection by high performance liquid chromatography with column switching].
    Author: Lu Q, Shao Q, Qu HB, Cheng YY.
    Journal: Zhongguo Zhong Yao Za Zhi; 2008 Dec; 33(23):2776-80. PubMed ID: 19260309.
    Abstract:
    OBJECTIVE: Integrating column switching for on-line concentration and programmed injection, a novel HPLC method is developed for simultaneous determination of high-content water-soluble components (danshensu, protocatechualdehyde, salvianolic acid B) and trace nerolidol in Xiangdan injection. The concentrations of water-soluble components in Xiangdan injection are roughly 1000 times of that of nerolidol. METHOD: The on-line concentration was performed on a Zorbax SB-C18 guard column. The separation was carried out on Lichrospher C18 column (4.6 mm x 250 mm, 5 microm). The mobile phase of guard column was mixtures of acetonitrile and 1.0% acetic acid water, and the flow rate was 0.5 mL x min(-1). The mobile phase of the analytical column was mixtures of acetonitrile and 0.05% acetic acid water, and the flow rate was set at 1.0 mL x min(-1). The column temperature was maintained at 40 degrees C, and the detection wavelength was 280 nm at 0-40 min, 210 nm at 40-55 min. The program injection was 10 microL of sample solution 1 at 0 min, 200 microL of sample solution 2 at 15.3 min. RESULT: The calibration curves of danshensu, protocatechualdehyde, salvianolic acid B and nerolidol showed good linear regression (R2 > 0.9990) within investigated concentration ranges. The average recoveries of the four analytes were between l00% and 102%, and the RSD values were less than 3.0%. For danshensu, protocatechualdehyde, salvianolic acid B and nerolidol, the limits of detection at a signal-to-noise (S/N) ratio of 3 were 17.1, 0.473, 60.2, 50.6 microg x L(-1), respectively. CONCLUSION: The method is a simple, sensitive and repeatable approach. More importantly, results indicate that the present method shows promising prospect for quality control of Xiangdan injection.
    [Abstract] [Full Text] [Related] [New Search]