These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Phosphorous removal in batch systems using ferric chloride in the presence of activated sludges.
    Author: Caravelli AH, Contreras EM, Zaritzky NE.
    Journal: J Hazard Mater; 2010 May 15; 177(1-3):199-208. PubMed ID: 20042277.
    Abstract:
    The objectives of this work were: (a) to analyze the effect of alkalinity, pH and initial Fe:P molar ratio (Fe(0):P(0)) on the precipitation of orthophosphate using ferric chloride in the presence of activated sludge in order to represent conditions of simultaneous precipitation, and in exhausted wastewater to simulate conditions of post-precipitation, (b) to compare the experimental results with predictions obtained from a chemical equilibrium model, and (c) to propose a mechanistic model to determine the dose of coagulant required to achieve a given orthophosphate removal degree at constant pH. Results showed that the presence of biomass did not affect the orthophosphate precipitation; however, addition of ferric chloride caused a drop of pH to values not compatible with the normal activity of activated sludges. For this reason, the wastewater was supplemented with NaHCO(3); when 1gL(-1) NaHCO(3) was added, orthophosphate removals higher than 97% and pH above 6.2 were obtained using Fe(0):P(0)=1.9. Precipitation assays at constant pH showed that Fe(III) hydrolysis and FePO(4) precipitation reaction compete with each other. Calculations using a chemical equilibrium model (CHEAQS) predicted that ferric phosphate precipitation should not take place if pH is higher than about 7.8. However, experimental results showed that ferric phosphate precipitation occurred even at pH 9. For this reason, a mechanistic model was proposed to predict orthophosphate concentrations as a function of Fe(0):P(0) at constant pH. The model can be applied to calculate the minimum Fe(III) concentration required to achieve a given discharge limit for orthophosphate as a function of its initial concentration and pH.
    [Abstract] [Full Text] [Related] [New Search]