These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Influence of adhesive properties on resin-dentin bond strength of one-step self-etching adhesives.
    Author: Hass V, Folkuenig MS, Reis A, Loguercio AD.
    Journal: J Adhes Dent; 2011 Oct; 13(5):417-24. PubMed ID: 21246075.
    Abstract:
    PURPOSE: To evaluate the association between the resin-dentin bond strength (microtensile bond strength, μTBS) and the physical properties (ultimate tensile strength [UTS] and microhardness [VHN]) of the cured adhesive resin using five commercial one-step self-etching systems. MATERIALS AND METHODS: Futurabond NR, Go, G Bond, 1-step All Bond SE and Clearfil S3 Bond were applied on flat superficial dentin surfaces. Each adhesive system was applied in five teeth. A resin buildup was then made. After 24 h, resin-dentin beams (0.9 mm2) were prepared to be tested immediately at 0.5 mm/min. For the UTS measurement, hourglass specimens were prepared with each adhesive system (n = 5) to be tested under tensile stress at 0.5 mm/min. The fractured specimens from the UTS test were taken to a Vickers microhardness tester (25 gf/20 s). μTBS, UTS, and VHN values were submitted to a one-way ANOVA and Tukey's test (α = 0.05) for pairwise comparisons. Correlations between μTBS, UTS and VHN were analyzed using the Pearson product moment correlation test (α = 0.05). RESULTS: Significantly higher μTBS values were observed for 1-step All Bond SE and Clearfil S3 Bond (p > 0.05). The adhesive All Bond SE showed the highest UTSmean among all systems (p < 0.05). The adhesives All Bond SE and G-Bond showed the highest microhardness mean among all systems (p < 0.05). A strong (r = 0.93) and significant (p = 0.021) correlation was only found between the μTBS and UTS values. CONCLUSION: The ultimate tensile strength of one-step self-etching systems correlates with the resin-dentin bond strength values.
    [Abstract] [Full Text] [Related] [New Search]