These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.
Pubmed for Handhelds
PUBMED FOR HANDHELDS
Search MEDLINE/PubMed
Title: Characteristics and kinetics of phosphate adsorption on dewatered ferric-alum residuals. Author: Wang C, Guo W, Tian B, Pei Y, Zhang K. Journal: J Environ Sci Health A Tox Hazard Subst Environ Eng; 2011; 46(14):1632-9. PubMed ID: 22092260. Abstract: The characteristics and kinetics of phosphate (P) adsorption on dewatered ferric-alum water treatment residuals (Fe-Al-WTRs) have been investigated. The existence of both aluminum (Al) and iron (Fe) in the residuals can result in significantly high P adsorption capacities. The P adsorption kinetics of Fe-Al-WTRs exhibited an initial rapid phase, followed by a slower phase. This could be described by three models, including a pseudo-first-order equation, a pseudo-second-order equation, and a double-constant rate equation. The latter was especially good for those runs with initial P concentrations of 500 and 1000 mg L(-1). Both the Langmuir and Freundlich isotherms fit the experimental data well, particularly the Freundlich isotherm, which had a correlation coefficient of 0.9930. The maximum measured P adsorption capacity of Fe-Al-WTRs was 45.42 mg g(-1), which is high when compared to those of most WTRs, as well as other reported adsorbents. The results also show that the P adsorption is a spontaneous endothermic process. Highest P adsorption capacities of Fe-Al-WTRs were measured at low pHs and a particle size range of 0.6 to 0.9 mm.[Abstract] [Full Text] [Related] [New Search]