These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Photocatalytic removal of cyanide with illuminated TiO(2).
    Author: Siboni MS, Samarghandi MR, Yang JK, Lee SM.
    Journal: Water Sci Technol; 2011; 64(7):1383-7. PubMed ID: 22179633.
    Abstract:
    Effects of TiO(2) dosage, pH and initial cyanide concentration on the removal efficiency of cyanide from aqueous solutions with illuminated TiO(2) have been investigated. Adsorption and oxidation were recognized as significant processes for the elimination of cyanide. From the Langmuir isotherm, the maximum adsorption capacity was determined as 17.24 mg/g at pH 7. Adsorbed amount of cyanide slightly increased as the TiO(2) dosage increased. However, as no significant increase was observed above 1 g/L TiO(2), an optimum TiO(2) dosage was determined as 1 g/L. Photocatalytic oxidation efficiency of cyanide was greatly affected by the solution pH. It increased as the solution pH decreased. The photocatalytic oxidation efficiency after 120 min was 80.4% at pH 3 while it was only 20.4% at pH 11. Photocatalytic oxidation of cyanide was well described by the second-order kinetics. Photocatalytic reaction with illuminated TiO(2) can be effectively applied to treat industrial wastewater contaminated with cyanide.
    [Abstract] [Full Text] [Related] [New Search]