These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Evaluation of a new wide pore core-shell material (Aeris WIDEPORE) and comparison with other existing stationary phases for the analysis of intact proteins.
    Author: Fekete S, Berky R, Fekete J, Veuthey JL, Guillarme D.
    Journal: J Chromatogr A; 2012 May 04; 1236():177-88. PubMed ID: 22443893.
    Abstract:
    The separation of large biomolecules such as proteins or monoclonal antibodies (mAbs) by RPLC can be drastically enhanced thanks to the use of columns packed with wide-pore porous sub-2 μm particles or shell particles. In this context, a new wide-pore core-shell material has been recently released under the trademark Aeris WIDEPORE. It is made of a 3.2 μm solid inner core surrounded by a 0.2 μm porous layer (total particle size of 3.6 μm). The aim of this study was to evaluate the performance of this new material, compare it to other recently developed and older conventional wide-pore columns and demonstrate its applicability to real-life separations of proteins and mAbs. At first, the traditional h(min) values of the Aeris WIDEPORE column were determined for small model compounds. The h(min) values were equal to 1.7-1.8 and 1.4 for the 2.1 and 4.6 mm I.D. columns, respectively, which are in agreement with the values reported for other core-shell materials. In the case of a small protein Insulin (5.7 kDa), the achievable lowest h value was below 2 and this impressive result confirms that the Aeris WIDEPORE material should be dedicated to protein analysis. This column was then compared with five other commercially available wide-pore and medium-pore stationary phases, in the gradient elution mode, using various flow rates, gradient steepness and model proteins of MW=5.7-66.8 kDa. The Aeris WIDEPORE material often provided the best performance, in terms of peak capacity, peak capacity per time and pressure unit (PPT) and also based on the gradient kinetic plot representation. Finally, real separations of filgrastim (18.8 kDa) and its oxidized and reduced forms were performed on the different columns and the Aeris WIDEPORE material provided the most impressive performance (peak capacity>100 for t(grad)<6 min). Last but not least, this new material was also evaluated on digested and reduced mAb and powerful, high-throughput separations were also attained.
    [Abstract] [Full Text] [Related] [New Search]