These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Evaluation of a MEMS-based dual metal-layer thin-film microelectrode array for suprachoroidal electrical stimulation.
    Author: Sui X, Sun J, Li L, Zhou C, Luo X, Xia N, Yan Y, Chen Y, Ren Q, Chai X.
    Journal: IEEE Trans Neural Syst Rehabil Eng; 2013 Jul; 21(4):524-31. PubMed ID: 22510954.
    Abstract:
    A double metal-layer thin-film platinum microelectrode array was fabricated for implantation between sclera and choroid based on MEMS processing techniques and photosensitive polyimide material. The array was composed of 60 stimulating sites (6 × 10) and four selectable returning electrodes. The diameter of each stimulating electrode was 350 μ m with a center-to-center spacing of 750 μm. The transient voltage responses of the electrode to current pulse stimulation indicated a charge-injection capacity greater than 52.1 μ C/cm (2) . Acute in vivo animal experiments showed that the implicit time of electrically evoked potentials (EEPs) was 17.09±1.45 ms at a threshold current of 25.55 ±5.43 μA for a full-row of simultaneously stimulated electrodes (i.e., current applied simultaneously to each of the 10 electrodes). Individual electrode stimulation threshold was 48.57 ±6.90 μA. The corresponding threshold charge densities were 13.28 ±2.82 μC/cm (2) and 25.24 ±3.59 μC/cm (2) , respectively. The spatial spread of the maximally recorded P1 response in the EEPs indicated a correspondence between the retinal stimulation site and the focal response location in the cortex. This method of array fabrication is suitable for acute suprachoroidal stimulation, and has a potential use for the fabrication of a visual prosthesis.
    [Abstract] [Full Text] [Related] [New Search]