These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Histological and SEM analysis of root cementum following irradiation with Er:YAG and CO2 lasers.
    Author: Almehdi A, Aoki A, Ichinose S, Taniguchi Y, Sasaki KM, Ejiri K, Sawabe M, Chui C, Katagiri S, Izumi Y.
    Journal: Lasers Med Sci; 2013 Jan; 28(1):203-13. PubMed ID: 22580557.
    Abstract:
    Recently, the Er:YAG and CO(2) lasers have been applied in periodontal therapy. However, the characteristics of laser-irradiated root cementum have not been fully analyzed. The aim of this study was to precisely analyze the alterations of root cementum treated with the Er:YAG and the CO(2) lasers, using non-decalcified thin histological sections. Eleven cementum plates were prepared from extracted human teeth. Pulsed Er:YAG laser contact irradiation was performed in a line at 40 mJ/pulse (14.2 J/cm(2)/pulse) and 25 Hz (1.0 W) under water spray. Continuous CO(2) laser irradiation was performed in non-contact mode at 1.0 W, and ultrasonic instrumentation was performed as a control. The treated samples were subjected to stereomicroscopy, scanning electron microscopy (SEM), light microscopy and SEM energy dispersive X-ray spectroscopy (SEM-EDS). The Er:YAG laser-treated cementum showed minimal alteration with a whitish, slightly ablated surface, whereas CO(2) laser treatment resulted in distinct carbonization. SEM analysis revealed characteristic micro-irregularities of the Er:YAG-lased surface and the melted, resolidified appearance surrounded by major and microcracks of the CO(2)-lased surface. Histological analysis revealed minimal thermal alteration and structural degradation of the Er:YAG laser-irradiated cementum with an affected layer of approximately 20-μm thickness, which partially consisted of two distinct affected layers. The CO(2)-lased cementum revealed multiple affected layers showing different structures/staining with approximately 140 μm thickness. Er:YAG laser irradiation used with water cooling resulted in minimal cementum ablation and thermal changes with a characteristic microstructure of the superficial layer. In contrast, CO(2) laser irradiation produced severely affected distinct multiple layers accompanied by melting and carbonization.
    [Abstract] [Full Text] [Related] [New Search]