These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Bacteriophage removal by Ni/Al layered double hydroxide in batch and flow-through column experiments.
    Author: Park JA, Lee CG, Kang JK, Kim SB.
    Journal: J Environ Sci Health A Tox Hazard Subst Environ Eng; 2012; 47(13):2060-8. PubMed ID: 22871003.
    Abstract:
    The objective of this study was to investigate the removal of the bacteriophage MS2 by Ni/Al layered double hydroxide (LDH). Batch experiments were performed using a powder form of Ni/Al LDH under various conditions. Column experiments were also performed under flow-through conditions with Ni/Al LDH coated sand. Batch tests showed that the powder form of Ni/Al LDH was effective for bacteriophage removal under the given experimental conditions (LDH dose of 2.5 g L(-1); initial MS2 concentration of 1.35 × 10(5) plaque forming unit (pfu) mL(-1)) with a removal capacity of 5.5 × 10(7) pfu g(-1). The results also indicated that the effect of the solution pH on the bacteriophage removal was minimal at pH 4.3-9.4. The influence of divalent anions (SO(2-) (4), CO(2-) (3), HPO(2-) (4); concentrations 1-100 mM) on the removal of the bacteriophage was significant, while the effects of monovalent anions (NO(-) (3), Cl(-)) were negligible. Column experiments showed that the log removal of MS2 was 4.51 in columns containing 100% Ni/Al LDH-coated sand, while it was 0.02 in columns containing 100% quartz sand (initial MS2 concentration of approximately 7.0 × 10(5) pfu mL(-1); flow rate of 0.5 mL min(-1)). These findings indicated that Ni/Al LDH-coated sand was far more effective at removing bacteriophage than sand alone. This study demonstrates that Ni/Al LDH can be used for virus removal in water treatment and filtration applications.
    [Abstract] [Full Text] [Related] [New Search]