These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


PUBMED FOR HANDHELDS

Search MEDLINE/PubMed


  • Title: Glancing angle deposited nanostructured film Fabry-Perot etalons for optical detection of ultrasound.
    Author: Hajireza P, Krause K, Brett M, Zemp R.
    Journal: Opt Express; 2013 Mar 11; 21(5):6391-400. PubMed ID: 23482209.
    Abstract:
    In this paper a new class of optical Fabry-Perot-based ultrasound detectors using low acoustic impedance glancing angle deposited (GLAD) films is demonstrated. GLAD is a single-step physical vapor-deposition (PVD) technique used to fabricate porous nanostructured thin films. Using titanium dioxide (TiO(2)), a transparent semiconductor with a high refractive index (n = 2.4), the GLAD technique can be employed to fabricate samples with tailored nano-porosity, refractive index periodicities, and high Q-factor reflectance spectra. The average acoustic impedance of the porous films is lower than bulk materials which will improve acoustic coupling, especially for high acoustic frequencies. For this work, two filters with high reflection in the C-band range and high transparency in the visible range (~80%) using GLAD films were fabricated. A 23 µm Parylene C layer was sandwiched between these two GLAD films in order to form a GLAD Fabry Perot Interferometer (GLAD-FPI). A high speed tunable continuous wavelength C-band laser was focused at the FPI and the reflection was measured using a high speed photodiode. The ultrasound pressure modulated the optical thickness of the FPI and hence its reflectivity. The fabricated sensor was tested using a 10 MHz unfocused transducer. The ultrasound transducer was calibrated using a hydrophone. The minimum detectable acoustic pressure was measured as 80 ± 20 Pa and the -3dB bandwidth was measured to be 18 MHz. This ultra-sensitive sensor can be an alternative to piezoelectric ultrasound transducers for any techniques in which ultrasound waves need to be detected including ultrasonic and photoacoustic imaging modalities. We demonstrate our GLAD-FPI for photoacoustic signal detection in optical-resolution photoacoustic microscopy (OR-PAM). To the best of our knowledge, this is the first time that a FPI fabricated using the GLAD method has been used for ultra-sensitive ultrasound detection.
    [Abstract] [Full Text] [Related] [New Search]