These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Characterization of Pb₂₄Te₇₆ quantum dot thin film synthesized by inert gas condensation.
    Author: Mahdy MA, Mahdy IA, El Zawawi IK.
    Journal: Spectrochim Acta A Mol Biomol Spectrosc; 2015 Jan 05; 134():302-9. PubMed ID: 25022502.
    Abstract:
    Air-stable and thermal-stable lead telluride quantum dot was successfully prepared on glass substrate by inert gas condensation (IGC) method. Argon (Ar) is the inert gas used during deposition process with a constant flow rate of 3 × 10(-3)Torr. The effect of heat-treatment process at different times was studies for structure, optical and electrical properties for nanocrystalline thin films. The structures of the as deposited and heat-treated films were investigated using grazing incident in-plane X-ray diffraction (GIIXD). The GIIXD pattern showed nanostructure face centered cubic structure of PbTe thin films. The energy dispersive X-ray analysis (EDX) of as deposited PbTe thin film was carried out and showed that the atomic ratio of Pb/Te was 24/76. The particle size of the as deposited PbTe film and after stored it in an unhumid atmosphere are 6.8 ± 0.3 nm and 7.2 ± 0.3 nm respectively as estimated form TEM image (i.e. in the same level of particle size). However, the particle size was changed to be 11.8 ± 0.3 nm after heat-treated for 5h at 473K. These particle size values of PbTe thin film are smaller than its Bohr radius. The estimated value of optical band gap Eg decreased from 1.71 eV for the as deposited film to 1.62 eV for film heat-treated (5 h at 473K). The dc electrical conductivity is increased with raising temperature in the range (303-473K) for all thin films under investigation. The deduced activation energy decreased from 0.222 eV for as deposited sample to 0.125 eV after heat-treated at 473K for 5 h.
    [Abstract] [Full Text] [Related] [New Search]