These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Comparison of a novel polytitanium chloride coagulant with polyaluminium chloride: coagulation performance and floc characteristics.
    Author: Zhao YX, Phuntsho S, Gao BY, Yang YZ, Kim JH, Shon HK.
    Journal: J Environ Manage; 2015 Jan 01; 147():194-202. PubMed ID: 25291677.
    Abstract:
    Polymerized inorganic coagulants are increasingly being used in the water supply and wastewater treatment process, yet there is limited research on the development of polytitanium coagulants. The aim of this study is to synthesize polytitanium chloride (PTC) coagulants and investigate their coagulation behavior and floc characteristics for humic acid removal in comparison to polyaluminum chloride (PAC). The PTC samples with different B (molar ratios of OH/Ti) values were prepared using an instantaneous base-feeding method, employing sodium carbonate as the basification agent. The coagulation efficiency was significantly influenced by different B values. The results suggest that the humic acid removal increased with the increasing B value for PAC, while the inverse trend was observed for PTC. The optimum B value was chosen at 1.0 and 2.0 for PTC and PAC, respectively. Under the optimum coagulant dose and initial solution pH conditions, the PTC coagulant performed better than the PAC coagulant and the floc properties were significantly improved in terms of floc growth rate and floc size. However, the PAC coagulants produced flocs with better floc recoverability than the PTC coagulants.
    [Abstract] [Full Text] [Related] [New Search]