These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Development of a Household Water Defluoridation Process Using Aluminium Hydroxide Based Adsorbent.
    Author: Mulugeta E, Zewge F, Chandravanshi BS.
    Journal: Water Environ Res; 2015 Jun; 87(6):524-32. PubMed ID: 26459821.
    Abstract:
    In this study, the removal of fluoride from water using aluminium hydroxide based adsorbent has been investigated in continuous operation. The effect of fluoride influent concentration, feed flowrate, and adsorbent bed height onto the breakthrough characteristics of the adsorption system were examined. The fixed-bed adsorption system was found to perform better with lower influent fluoride concentration, lower flowrate, and higher bed depth. Thermodynamic evaluation using the bed depth service time model indicated that the fluoride adsorption capacity was 25.8 mg F-/g of adsorbent, which is high compared to commercially available activated alumina (1.8 to 1.9 mg/g). Kinetic studies showed that the rate of adsorption in continuous studies was in the range of 6.12×10(-3) to 39.3×10(-3) L/mg.h under different operating conditions. The household defluoridation unit (HDU) was tested at an up-flow mode and it was determined that the HDU packed with 0.9 kg of adsorbent with 28.3 cm of bed depth resulted in a specific safe water yield of 823.79 L. Regeneration of the exhaust media using 1% NaOH and 0.1 M HCl showed that the adsorbent could be reused. The estimated running cost of the unit was 2.0 U.S. dollar/m3 of treated water, with the potential to minimize further. Hence, it was concluded that the proposed method is simple and exhibits superior performance for the treatment of fluoride-contaminated water with the potential for household application.
    [Abstract] [Full Text] [Related] [New Search]