These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Accuracy of δ(18)O isotope ratio measurements on the same sample by continuous-flow isotope-ratio mass spectrometry.
    Author: Wong WW, Clarke LL.
    Journal: Rapid Commun Mass Spectrom; 2015 Dec 15; 29(23):2252-6. PubMed ID: 26522317.
    Abstract:
    RATIONALE: The doubly labeled water method is considered the reference method to measure energy expenditure. Conventional mass spectrometry requires a separate aliquot of the same sample to be prepared and analyzed separately. With continuous-flow isotope-ratio mass spectrometry, the same sample could be analyzed sequentially for both (2)H and (18)O content and thus minimize sample requirement, reduce analytical cost, and avoid memory effect. METHODS: The (2)H contents of 197 urine samples collected from 22 doubly labeled water studies were determined using a Thermo Delta V Advantage continuous-flow isotope-ratio mass spectrometer. The (18)O content of these samples was measured either using a separate aliquot of the same sample using a VG Isogas gas-isotope-ratio mass spectrometer or using the same sample following the (2)H measurements on a Thermo Delta V continuous-flow isotope-ratio instrument. RESULTS: The δ(18)O values using the same aliquot of samples were accurate to 0.18 ± 2.61‰ (mean difference ± standard deviation (SD); 95% CI, -0.18 to 0.55‰; P = 0.33) compared with the values based on the standard conventional method. Bland and Altman pair-wise comparison also yielded a bias of 0.18‰ with a 95% limit of agreement between -4.94 and 5.30‰. CONCLUSIONS: The study demonstrated that continuous-flow isotope-ratio mass spectrometry is capable of producing accurate (18)O measurements on the same sample after (2)H measurements. The method greatly reduces the analytical cost and sample size requirement and could easily be adopted by any laboratories equipped with a continuous-flow isotope-ratio mass spectrometer.
    [Abstract] [Full Text] [Related] [New Search]