These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Prosthesis and Hybrid Strategy Consideration for Treating Two-level Cervical Disc Degeneration in Hybrid Surgery.
    Author: Li Y, Fogel GR, Liao Z, Tyagi R, Liu W.
    Journal: Spine (Phila Pa 1976); 2018 Mar 15; 43(6):379-387. PubMed ID: 28678112.
    Abstract:
    STUDY DESIGN: Biomechanical analysis using a validated nonlinear finite element (FE) model. OBJECTIVE: The aim of this study was to combine the strategy of two-level hybrid surgery (HS) to explore how prostheses affect cervical biomechanics. SUMMARY OF BACKGROUND DATA: Few FE studies have explored differences in biomechanical behavior between combined and stand-alone structured prostheses with HS. No FE studies have considered whether the prosthesis type and hybrid strategy influence two-level HS. METHODS: Three prostheses-Prodisc-C, PCM, and DCI-were analyzed in flexion and extension during HS at C4-C6. There were two HS constructs: anterior cervical discectomy and fusion (ACDF) conducted at the C4-C5 levels and anterior cervical disc replacement (ACDR) conducted at C5-C6 levels (ACDF/ACDR); ACDR/ACDF. RESULTS: Flexion motion at adjacent levels was greater than that of intact spine. A maximum increase of 80% was observed with PCM in the ACDF/ACDR group. Extension motion at adjacent levels for both hybrid strategies with PCM, however, was similar to that of intact spine (<10% change), whereas it increased by 14% to 32% with DCI. The strain energy-storing capability with DCI tended to be similar to that of normal discs. Facet stress at the infra-adjacent level, however, significantly increased with DCI in both groups, whereas it increased with PCM and Prodisc-C only in the ACDR/ACDF group. All prostheses produced overloads on cartilage at the arthroplasty level. Prodisc-C and PCM cores showed stress above the yield stress of ultrahigh-molecular-weight polyethylene. CONCLUSION: Each prosthesis had advantages and disadvantages. In extension, DCI (vs. Prodisc-C and PCM) exhibited more compensation at adjacent levels in terms of motion, moments, and facet stress. The biomechanical performance of Prodisc-C was easily affected by the hybrid strategy. Thus, if only a combined-structure prosthesis is available for two-level HS (C4-C6 level), the hybrid strategy should be carefully evaluated and the ACDF/ACDR construct is recommended to avoid accelerating degeneration of adjacent segments. LEVEL OF EVIDENCE: 5.
    [Abstract] [Full Text] [Related] [New Search]