These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.
Pubmed for Handhelds
PUBMED FOR HANDHELDS
Search MEDLINE/PubMed
Title: Unraveling the catalyzing behaviors of different iron species (Fe2+ vs. Fe0) in activating persulfate-based oxidation process with implications to waste activated sludge dewaterability. Author: Zhen G, Lu X, Su L, Kobayashi T, Kumar G, Zhou T, Xu K, Li YY, Zhu X, Zhao Y. Journal: Water Res; 2018 May 01; 134():101-114. PubMed ID: 29407644. Abstract: Dewatering of waste activated sludge (WAS) is of major interest in its volume reduction, transportation and ultimate disposal. Persulfate-based oxidation process is a newly developed option for enhancing WAS dewaterability through the generation of powerful sulfate radicals (SO4-·). However, the enhancement in WAS dewaterability by persulfate differs with the species of iron catalysts used. In this study, two types of iron catalysts (i.e. Fe2+ vs. Fe0) were employed to initiate the persulfate (S2O82-), and the catalyzing behaviors and the underlying principles in enhancing WAS dewaterability were investigated and compared. The Fe2+ exhibited the high effectiveness in catalyzing the decomposition of persulfate to sulfate radicals (SO4-·), inducing the greater improvement in WAS dewatering. The WAS dewaterability (indicated by dry solids content after filtration) increased with the added S2O82-/Fe2+ dosages, with the dry solids content reaching up to 5.1 ± 0.8 wt% at S2O82-/Fe2+ dosages of 1.2/1.5 mmol/g-VS after only 30 s' filtration, roughly 1.8-fold increase than raw WAS (1.8 ± 0.1 wt%). In contrast, the influence of the persulfate oxidation when activated with Fe0 on WAS dewaterability was statistically insignificant. The WAS dewaterability remained nearly unchanged (i.e. dry solids content of 2.0 ± 0.0 wt%), irrespective of the employed S2O82-/Fe0 dosages. Further analysis demonstrated that the WAS dewaterability negatively corresponded to loosely bound extracellular polymeric substances (LB-EPS) and tightly bound EPS (TB-EPS). The abundant SO4-· from S2O82-/Fe2+ system could effectively disrupt the gel-like EPS matrix, break apart the cells and subsequently arouse the release of the water inside EPS and cells, facilitating water-solid separation. In the case of S2O82-/Fe0, the dissolution of Fe0 particles was the rate-limiting step, due to the formation of oxide iron layer near Fe0 metallic surface, which resulted in the slow SO4-· production and thus hardly promoted WAS dewaterability. The pH adjustment could accelerate Fe0 dissolution and enhance the dewatering performance of S2O82-/Fe0 process to a certain degree, but the effect was unsatisfactory. Additionally, the observations regarding the dissolved organic matters and ammonium collectively revealed that except for enhancing WAS dewatering, S2O82-/Fe2+ oxidation could concurrently degrade COD and ammonia from WAS filtrate, lighten the burden of the subsequent sewage treatment facilities and reduce operational expense. Hence, from an environmental and economic perspective, the S2O82-/Fe2+ system possesses much greater promise for WAS dewatering.[Abstract] [Full Text] [Related] [New Search]