These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Macroemulsion-based dispersive magnetic solid phase extraction for preconcentration and determination of copper(II) in gasoline.
    Author: Cunha FAS, Ferreira DTS, Andrade WCR, Fernandes JPA, Lyra WS, Pessoa AGG, de Araujo MCU.
    Journal: Mikrochim Acta; 2018 Jan 10; 185(2):99. PubMed ID: 29594660.
    Abstract:
    A new method referred to as microemulsion-based Dispersive Magnetic Solid-Phase Extraction (MDM-SPE) is presented for use in the extraction and preconcentration of metal ions from complex organic matrices. MDM-SPE combines the features of magnetic nanoparticles (MNPs) and microemulsions. It was successfully applied to the extraction of copper(II) from gasoline prior to its determination by Graphite Furnace Atomic Absorption Spectrometry (GF-AAS). The material for use in MDM-SPE was obtained by first functionalizing MNPs of the type Fe3O4@Al2O3 with sodium dodecyl sulfate and the chelator 1-(2-pyridylazo)-2-naphthol (PAN) dispersed in 1-propanol. The resulting functionalized magnetic MNPs were dispersed in a microemulsion prepared from gasoline, buffer, and 1-propanol. After waiting for 5 s (during which the formation of the copper complex on the MNPs is complete), the MNPs are magnetically separated. The complex was then eluted with 2 mol L-1 HNO3, and the eluate submitted to GF-AAS. Various parameters were optimized. Copper(II) can be quantified by this method over a linear range that extends from 2.0 to 10.0 μg·L-1. Other figures of merit include (a) a 37 ng·L-1 detection limit, (b) a repeatability of 1.1%, (c) a reproducibility of 2.1%, and (d) an enrichment factor of nine. The high surface-to-volume ratio of the microemulsion containing the dispersed magnetic sorbent warrants an efficient contact for reaction between copper(II) and the complexing agent, and this results in fast (about 40 s) extraction and pre-concentration of copper(II). MDM-SPE is accurate, precise and efficient. Microemulsions do not break down, and phase separation, heating, laborious, and time-consuming sample preparation, and incorporation of impurities into the graphite furnace (which can generate inaccuracies in GF-AAS analysis) are not needed. Graphical abstract Schematic of a new method for Microemulsion-based Dispersive Magnetic Solid-Phase Extraction (MDMSPE) using functionalized magnetic nanoparticles (FMNPs). It was applied to the preconcentration of copper(II) in gasoline.
    [Abstract] [Full Text] [Related] [New Search]