These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Influence of torrefaction with Mg-based additives on the pyrolysis of cotton stalk.
    Author: Zeng K, Yang Q, Zhang Y, Mei Y, Wang X, Yang H, Shao J, Li J, Chen H.
    Journal: Bioresour Technol; 2018 Aug; 261():62-69. PubMed ID: 29653335.
    Abstract:
    The study presented an approach to introduce Mg-based additives into cotton stalk for strengthening deoxygenation effect during torrefaction. Then catalytic pyrolysis of torrefied feedstock with Mg-based additives residue as catalyst was performed at 550 °C for 10 min in a fixed-bed reactor. The effects of torrefaction temperature (200, 230, 260, 290, 320, 350 °C), type of Mg-based additive (MgO and MgO-K2CO3), mass ratio of additive to biomass (0.5, 1 and 2) on pyrolysis were investigated. The results indicated that yields of bio-char and bio-oil significantly increased and decreased with torrefaction temperature rising to 350 °C. MgO inhibited pyrolysis bio-char yield increase with torrefaction severity. MgO-K2CO3 increased H2 yield a lot from 1.39 to 3.67 mmol/g. It also effectively improved the aromatic hydrocarbons in bio-oil and the reduction of acids. A maximum aromatic hydrocarbons yield of 16.05% was obtained with MgO-K2CO3 (the mass ratio of 0.5:1) at torrefaction temperature of 320 °C.
    [Abstract] [Full Text] [Related] [New Search]