These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effects of wood moisture on emission factors for PM2.5, particle numbers and particulate-phase PAHs from Eucalyptus globulus combustion using a controlled combustion chamber for emissions.
    Author: Guerrero F, Yáñez K, Vidal V, Cereceda-Balic F.
    Journal: Sci Total Environ; 2019 Jan 15; 648():737-744. PubMed ID: 30130737.
    Abstract:
    Polycyclic aromatic hydrocarbons, PM2.5 and micrometer-sized particles are mainly emitted by residential wood combustion, affecting air pollution in the cities of Chile. Eucalyptus globulus (EG) at 0% and 25% wood moisture was burning using a new controlled combustion chamber for emissions (3CE) to determine the emission factors of PM2.5, micrometer-sized particle numbers (0.265μm to 34.00μm) and 16 EPA-PAHs plus retene adsorbed on PM2.5 quartz filters. A method using accelerated solvent extraction, concentration, clean-up and GC-MS is proposed for determining emission factors for 16 EPA-PAHs for the concentration from biomass combustion. Chromatographic conditions and analytical steps were optimized in terms of linearity, selectivity, limits of detection and quantification, precision and accuracy. The recovery obtained from urban dust SRM 1649A (NIST reference material) analyses was between 63% (benzo[b]fluoranthene) and 102% (benzo[k]fluoranthene). In this investigation, it was shown that increasing the wood moisture in combustion tests decreased combustion efficiency (93% to 49%) and increased the emission factors of total PAHs (5215.47ngg-1 to 7644.48ngg-1), the gravimetric PM2.5 (2.01g kg-1 to 22.90gkg-1) and the total number of measured micrometer-sized particles (3.15×1012 particles kg-1 to 1.33×1013 particles kg-1) due to incomplete combustion. The PM2.5 emission rates (ERs) were estimated using EG at 0% WM (2.39g-1 to 3.15gh-1) and 25% WM (27.32gh-1 to 35.77gh-1) for three regions of Chile. In almost all regions, the Chilean emission regulations were exceeded for PM2.5 from wood combustion in the heater (stove with thermal power ≤8kW and emission limit of 2.5gh-1). Finally, when using wet wood for residential combustion, the amount of PAHs on the PM2.5 increased, presenting a potential hazard to population health. Therefore, improvements are necessary in the current regulation of PM emissions.
    [Abstract] [Full Text] [Related] [New Search]