These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Effect of Al Content on Microstructure and Mechanical Property of Nanocomposite TiAlSiN Thin Films.
    Author: Sun D, Liu H, Zeng X, Zhang S, Huang J.
    Journal: J Nanosci Nanotechnol; 2019 Jan 01; 19(1):199-205. PubMed ID: 30327023.
    Abstract:
    TiAlSiN thin films exhibit high hardness due to the multicomponent and multiphase structures. Effects of Si on TiAlSiN microstructure and mechanical properties have been well studied. However, there is insufficient information on the effects of Al. Thus, in this work, Al-contained nanocomposite nc-TiN/a-SiNx thin films with Al up to 10 at.% were prepared by magnetron co-sputtering Ti, Al and Si3N4 targets in Ar/N2 gas atmosphere. The effects of Al on TiAlSiN microstructure and mechanical property were well studied. Adjusting Al/(Ti+Al) target power ratio tuned chemical composition, microstructure and consequently mechanical properties. With increase of Al/(Ti+Al) target power ratio from 0 to 0.2, Al content increased from 0 to 10 at.%. X-ray photoelectron spectroscope results showed that aluminum nitride was formed. X-ray diffraction results confirmed that the nanocrystalline phase TiN was with Si and Al in its structure, or (Ti, Al, Si) N. The matrix was amorphous silicon nitride containing aluminum nitride. Nanoindentation hardness of the thin films remained at about 28 GPa till Al addition was increased to 3.1 at.%.
    [Abstract] [Full Text] [Related] [New Search]