These tools will no longer be maintained as of December 31, 2024. Archived website can be found here. PubMed4Hh GitHub repository can be found here. Contact NLM Customer Service if you have questions.


Pubmed for Handhelds

PUBMED FOR HANDHELDS

Search MEDLINE/PubMed

  • Title: Data acquisition system for MAET with magnetic field measurements.
    Author: Kaboutari K, Önder Tetik A, Ghalichi E, Soner Gözü M, Zengin R, Güneri Gençer N.
    Journal: Phys Med Biol; 2019 May 29; 64(11):115016. PubMed ID: 30970342.
    Abstract:
    Magneto-acousto-electrical tomography (MAET) is an imaging modality to image the electrical conductivity of biological tissues. It is based on electrical current induction by using ultrasound under a static magnetic field. The aim of this study is to develop a data acquisition system for MAET based on magnetic field measurements. The static magnetic field is generated by six permanent neodymium magnets. A 16-element linear phased array (LPA) transducer is utilized to generate acoustic pressure waves inside the phantom. To measure the magnetic field intensity generated by the induced currents, contactless receiver sensors are developed using two similar disk multiple layer coils, which are Helmholtz coil sensor. Physical properties and electrical characteristics of the sensors are assessed. A two-stage cascaded amplifier is designed and utilized in the receiving system. The gain of the cascaded amplifier at 1 MHz is adjusted to be 96 dB. Experimental studies are conducted with two different phantoms, having 3 S m-1 and 58 S m-1 electrical conductivity, respectively. A-scan and B-scan images of phantoms are obtained with the LPA transducer. Comparison of the ultrasound (A-scan) and MAET signals reveals that 3 S m-1 conductive inhomogeneity can be detected with this data acquisition system. Furthermore, the front and rear interfaces of an inhomogeneity ([Formula: see text]) of 58 S m-1 conductivity are detectable.
    [Abstract] [Full Text] [Related] [New Search]